electrical question for someone with an S13 FSM

[USDM240]

the three wires that plug into the back of the stock 6054 headlights: which wires do what? i need to wire up a set of aftermarket projectors to function like the stock headlights, but i dont have any wiring diagrams, or an FSM. any info would be greatly appreciated.

[navysnail]

i have an fsm, ill check it out in a little bit

[USDM240]

thanks man.

[ziggy682]

You can figure it out in about .2 seconds with a test light, or a voltage meter.

[USDM240]

You can figure it out in about .2 seconds with a test light, or a voltage meter.

if i had one, i wouldnt be asking this question now would i?

[USDM240]

someones got to have an FSM laying around...

[ricebike]

3 wires comin outta the socket? exsquezze me, i'm @ newbie @ eletrical...

well 1 is the common wire that ties it back into the system: pink/black stripe or pink

the other 2 ties it to the low/high beam filaments...

low:green/blue stripe green/yellow stripe

high:red/green stripe red/black stripe

[USDM240]

3 wires comin outta the socket? exsquezze me, i'm @ newbie @ eletrical...

well 1 is the common wire that ties it back into the system: pink/black stripe or pink

the other 2 ties it to the low/high beam filaments...

low:green/blue stripe green/yellow stripe

high:red/green stripe red/black stripe

thank you sir. you have been most helpful.

[ricebike]

um, lemme know how it works out for u... w/ pics preferably. I recalled this when i had to replace both my headlights w/ sylvania's xtra vision bulbs; same part # but beam pattern focused to the center & some focused to the sides of the vehicle...

[USDM240]

um, lemme know how it works out for u... w/ pics preferably. I recalled this when i had to replace both my headlights w/ sylvania's xtra vision bulbs; same part # but beam pattern focused to the center & some focused to the sides of the vehicle...

will do. havent had the time to mess around with it yet.