Electrical problem after intake mani reinstall..

ONLY for ADVANCED technical discussion about the 240sx!
Exille
Posts: 41
Joined: Fri Dec 23, 2005 2:18 pm
Car: 1993 240sx SE

Post

I just finished bolting the entire intake manifold back up to my 93 hatch, i went to start it up and it runs great, except every other minute or so, the radio go black, the tach and temp gauge stop working, the brake light comes on and pretty much everything else eletronic stops...the engine keeps running though, i took it for a test drive and it drives great, its electronics just stop working...im positive i hooked everything back up, with the exception of the secondary butterflys...which i removed and plugged the appropriate vac lines...what could this be? bad ground? i think i may have relocated a ground...would that have done it?


User avatar
Fenvy
Posts: 5052
Joined: Thu Jan 29, 2004 9:30 am
Car: 2005 350Z Base 6MT

Post

it might

why don't you use a multimeter to check?

Exille
Posts: 41
Joined: Fri Dec 23, 2005 2:18 pm
Car: 1993 240sx SE

Post

also, there was a new sound when i was driving, it was a kind of buzzing in the middle of the dash...relay or just something loose?

Exille
Posts: 41
Joined: Fri Dec 23, 2005 2:18 pm
Car: 1993 240sx SE

Post

Heres a update,took it on a longer test drive, discovered that whenever i hit the brake or use my trn signals i can hear a relay click and my radio,gauges and lights turn off then come back on, tach also is bouncing now....also overheated, radiator is full so is overflow....what the heck is goign on?!
Modified by Exille at 10:12 AM 3/11/2006

Exille
Posts: 41
Joined: Fri Dec 23, 2005 2:18 pm
Car: 1993 240sx SE

Post

bump?


Return to “240SX Technical Forum”