egr with turbo kade

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
Patarach
Posts: 270
Joined: Sun Aug 05, 2007 5:00 pm
Car: 240sx convertible KA-T

Post

I was wondering where the egr valve goes once you have turboed your car, I must pass emissions so its not an option to remove it. Does it go on the manifold side or the o2 sensor/downpipe side?


User avatar
98koukile
Posts: 562
Joined: Fri Jan 12, 2007 9:14 pm
Car: 1998 Nissan 240SX LE

Post

Just get a block off plate for the intake side, and plug the manifold. If you need to pass emissions then, like I just posted on another thread... 1/4 watt 100 ohm resistor from Radio Shack for the EGR sensor

User avatar
Patarach
Posts: 270
Joined: Sun Aug 05, 2007 5:00 pm
Car: 240sx convertible KA-T

Post

wouldn't they notice something missing on the visual inspection?

User avatar
98koukile
Posts: 562
Joined: Fri Jan 12, 2007 9:14 pm
Car: 1998 Nissan 240SX LE

Post

Not if you plug the other side into the plug and tape them together without completing the circuit. If you mean the egr tube going to the manifold... a turbo doesn't come stock so your ****ed if they notice either anyways


Return to “240SX Technical Forum”