EGR delete, Vaccum help! plzzzzzz

ONLY for ADVANCED technical discussion about the 240sx!
highintheskyy95
Posts: 7
Joined: Mon May 31, 2010 9:21 am
Car: 240 sx 95

Post

hello everyone,
iv been on this forum before and got lots of help, i was wondering if id be that lucky again.
im still in possesion f my 95 Nissan 240sx. I'm currently deleting my EGR valve due to continuos issues with it.
I've read up on it many times, and I've got dozens of sites bookmarked, in which they show me what the lines look like before the delete, but none to show me what it looks like after the delete.
does anyone know where each vaccum line goes? I've got what i believe to b 5 vacuum ports that need to be connected to one another, and i don't know where each ones goes. :(
i tried to remember where each one went, but it started pouring and i had to pack it all up quickly :/

below I've posted a rough drawing of what i see behind my engine after deleting my EGR, and blocking off both the intake man hole and exhaust man hole.

The image shows 2 metal lines coming form the engine, 2 plastic vacuum ports coming from a cylindrical tube, and 1 metal tube coming from what appears to be above the transmission???
any help guys


highintheskyy95
Posts: 7
Joined: Mon May 31, 2010 9:21 am
Car: 240 sx 95

Post

Image[/img]
Image

highintheskyy95
Posts: 7
Joined: Mon May 31, 2010 9:21 am
Car: 240 sx 95

Post

any help would b appreciated guys, even if its just to point me in the right direction. my car wont run until i get these lines figured out. :/
Image
<a href="http://s122.photobucket.com/albums/o273 ... uymyfu.jpg" target="_blank"><img src="http://i122.photobucket.com/albums/o273 ... uymyfu.jpg" border="0" alt="Photobucket"></a>

lbreevesii
Posts: 190
Joined: Wed Aug 03, 2005 2:59 pm
Car: S13 hatch LeMons project - Kaputzen!
BMW E30
Location: NC

Post


highintheskyy95
Posts: 7
Joined: Mon May 31, 2010 9:21 am
Car: 240 sx 95

Post

As much as i do appreciate the the web site :) (and i searched everywhere on google and didnt find THAT website)
but all those pictures are of s13's with swirl valves and odd vacuum seperators :confused: ...my s14 doesnt have that vacuum steup.

Can anyone, with an S14, that has done this delete, simply take a picture of the intake tubes behind the engine...it would be very much appreciated. :dblthumb:

liquid_cool
Posts: 1700
Joined: Sat Jul 05, 2008 3:02 am
Car: 1990 Nissan 240SX KA24DE-T swap 8.6:1cr, duelsprings, ti retainers,supertech pistons, K1 H-beems balanced internals ect ect

Post

my s13 has a 94 swapp in it with a full delete..i have pics posted on both myspace accounts...maybe it will help ya out..just pm me if ya get stuck...i hope the pics are close enough for ya to see.

highintheskyy95
Posts: 7
Joined: Mon May 31, 2010 9:21 am
Car: 240 sx 95

Post

hey liquid, thanks for the effort, but ur vacuum setup on ur s13 is slighlty different from my s14....ur pics also will shows a few vacuum lines, but non showing where they start and/or end at.
Can ANYONE with an s14 with an EGR delete, please take a picture of thier fire wall showing as many vacuum lines as possible??
It'd b much appreciated! :dblthumb: i could even paypal u a couple bucks if it makes it more worth someones while :naughty:


Return to “240SX Technical Forum”