ECU mounting

[GSss10Trunks]

Hey Guys I did my RB25DET Swap awhile back and jumped right into it way to fast and forgot to take some notes and now I've run into a cosmetic problem.

I never took notice to how the factory ECU was mounted so now I can't figure out how to mount the RB ECU so if any one with this swap could help me out with some pictures or something that would be great because I would really like to get my Glove box and kick panel back

[Joe]

just ziptie it up, put the plastic garnish over it, done.

[Darius]

Kamin is right. I tried to swap the brackets over from my KA and one didn't fit and the other didn't mount under the dash correctly so I just set it in there and zip tied everything together. It isn't going anywhere so I wouldn't sweat it.

[GSss10Trunks]

Thanks For the Help. Will do

[240z4u]

I used velcro.

Evan

[rb25drag]

I actually used one of the original brackets and got the hole closest to the door and floor to line up. It allowed me to put my kick pannel back in also. So it looks factory!