ecu change

Post by **bedbull** » Sat Aug 10, 2002 3:02 am

ever tried putting the sr20 ecu on the ka24de engine

Post by **Daunttless** » Sat Aug 10, 2002 3:02 am

they are different engines.

Post by **bedbull** » Sat Aug 10, 2002 3:02 am

i put on a sr20 ecu on a ka24de with ka wires and the engine kicks a**

Post by **Daunttless** » Sat Aug 10, 2002 3:02 am

hmmmmm, I guess it could work....You are running much smaller injectors so when it sets the duty cycle on them you're leaning your engine way out. I would just be concerned about starving your engine as the injectors are running at an extremely low duty cycle...I don't know what other complications might arise...

Post by **bedbull** » Sat Aug 10, 2002 3:02 am

it does not seem to be leaning out at all only problem is it needs the speed sensor cause when the rpm reaches bewteen 5to 6000rpm the ecu cuts the engine out till the rpm drops then its on to the races again, anyway i have a friend who says he knows how to get around the speed sensor problem, i'll let you know what happens, by the i am still using the ka air flow meter

ecu change

ecu change

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums