ebay exhaust

[Asmar]

eBay FTW...

[NismoDriver240]

eBay FTW...

check the sig V

[callmeweezy724]

there tenzo,s i beleave the number is an gf 7 s there 19 by 10s out back and 18 by 8s on the front .

whoa..those are 19s? they dont look like it...i like em tho.

[poems2beats]

So I have an exhaust problem and now im thinking of getting one of these, just because it would be a cheap fix. BTW by bolt on, it means you remove the old exhaust and this exhaust bolts right on? Sorry for the stupid question but iv never installed an exhaust

[numbnuts240]

you are correct, unbolt old exhaust from cat and the new one should bolt right back into its place, no modification required. it's almost guaranteed to be a bit of a pain due to the bolts being rusty though.

[poems2beats]

it's almost guaranteed to be a bit of a pain due to the bolts being rusty though.

PB Blaster FTW. Thnx thou, i was kinda worried...

[Nis-240sx-san]

I just ordered mine from japanimportshop a few days ago. I should be getting it soon. I'll take some pics when it comes in.

[ELEMENT692121]

how much did you pay for yours i think i got a really good deal somehow .. i looked again and all the listings were at 200 or a lil more

[ELEMENT692121]

i got some more pics today after i had my car tinted what u guys think ??

[IMG][/IMG]

[IMG][/IMG]http://i183.photobucket.com/albums/x200 ... ure125.jpg

[Nis-240sx-san]

yea I paid 200

[ELEMENT692121]

[IMG][/IMG]

[ELEMENT692121]

[IMG][/IMG]

[ELEMENT692121]

sorry for multiple post but it will never let me post more than one pic per post ..

[Nis-240sx-san]

Oh btw, I love the flat black

[ELEMENT692121]

thanks it cost me about $200 bucks and a weekend of time cause its actually all jammed out also .. i actually recently found out about this john deer satin black single stage and i think im gonna redo it i want it flawless but the hood didnt turn out as good as i had hoped ..

[NismoDriver240]

looks sweeeeet.. but $200 paint? i hope it wasnt rattle-canned for that much

[Asmar]

i got some more pics today after i had my car tinted what u guys think ??

[IMG][/IMG]

[IMG][/IMG]http://i183.photobucket.com/albums/x200 ... ure125.jpg

Looks good.

[ELEMENT692121]

looks sweeeeet.. but $200 paint? i hope it wasnt rattle-canned for that much

yeah it was but i did it right i sanded everything down jammed it out fixed a few dings and yes i know i have one on my fender lol .. apperently i missed that one .. between the sand paper the tape the mask paper the wire to weld up the trunk and the paint it was 200 .. the bad part is im gonna redo it with better paint now .. by the way if anyone wants a full right hand drive clip minus the engine and trans its gonna be the twin hallogen front and the black bar grille .. ill have it as of next weekend so if anyone has any interest let me know ..

[bloodspread]

your car and exhaust look great, i have an ebay tsudo 3 inch catback exhaust but i needed to weld a bigger flange on the cat and bend one of the hangers to fit with out it hitting metal. otherwise its a good quality exhaust that i have had on my car for 4 months with my only complaints being of the loudness of the exaust on long trips otherwise it sounds sexy

[ELEMENT692121]

thats why i was so impressed with this exhaust i didnt have to weld up anything or bend any hangers and it fitt absolulty perfect only bad thing is for the price all i can picture is some young *** korean kid with a welder in his hand in some sweat shop .. lol not really lol

[PervyDrifter]

I need an exhaust bad. Im pretty sure im gonna get the one your vouching for. But has anyone used or heard anything about this one?

Heres a link to ithttp://cgi.ebay.com/ebaymotors...sting

THanks

[spooled240]

i don't know man, I got an ebay n1 dual set for my s14 from SSAC and it didn't fit too well and some exhaust hangers needed modifying and rewelding. Just the way it's designed it hangs a little to the center of the car and hangs pretty low at stock ride height.

Looks pretty good here though after I fixed it:

[PervyDrifter]

Thanks man. Someone on the first page said they had problems with an ebay dual exhaust. And you make 2. Looks good after you fixed it though.Man, i was trying to find something with 2.5 piping. Im running stock E engine. Ill probably do something small like headers. Do you think 3" is over kill for stock motor? Is everyone running turbos with these exhausts?

Element-Thanks alot for posting this exhaust up, do you think you could throw up a video clip. It can be ****ty quality footage as long as the sound is ok. I think this would help alot of people out.thanks

[KA24Power]

I did a review on the ebay dual exhaust, my car is up on jack stands right now so I can't tell you how low it sits, but the fitment was great for mine!

zerothread?id=314146

[PervyDrifter]

I did a review on the ebay dual exhaust, my car is up on jack stands right now so I can't tell you how low it sits, but the fitment was great for mine!

zerothread?id=314146

Badass review ka! Wish people would do this for more ebay stuff. Helps alot. Both exhaust look good to me. But since the dual is the one that caught my eye first and i have confirmation on its fitment,quality, etc. Im gonna get it. Those 2 Vid clips sound really good.Now all i have to do is sell my bass amp to get the exhaust.

Wish someone would do a review on the headers for the SOHC!

[spooled240]

3" is definitely overkill for a n/a ka but good for turbo's. With less back pressure, you will lose some torque and get a little worse mileage. I think the back pressure produced from the catalytic converter could fix that though..anyone wanna confirm that?

ebay stuff: some fit, some don't..some work, some don't....it's a gamble..

[NismoDriver240]

Wish people would do this for more ebay stuff. Helps alot.

will do!! I'm writing major reviews for ebay front mounts intercooler, piping, ssqv knockoff, whatever exhaust i get, my ebay gauges, everything. ill post a link in my sig under "Curious?" ... right now it links to a thread just kinda going over ideas, but ill link it to the actual thread once I do my swap

nice vids too!! makes me even more excited... very excite!!!

[scels240]

so u spray painted the whole car?what did u use the mask paper and why did u have to weld the trunkwhat is the next paint your going to use?cuz i want to do the same to my car flat black is badddd

[PervyDrifter]

Nismodriver-GL with you EBAY project car. Sounds like a plan. In the near future ill write a review for the exhaust im getting, the headers and the intake. Kind of hard finding a decently priced intake for the SOHC though.

[Xdisaster240sX]

Hey, Did you get the front clip yet?