ebay exhaust? ? ?

Discuss topics related to the CA18DE and CA18DET series engines.
User avatar
Tyson240sx
Posts: 46
Joined: Sat Jul 30, 2005 12:42 pm
Car: 240sxca18det
Contact:

Post

What do your guys think of ebay exhaust? ? I hear most of ebay stuff is crap. but my buddy is tellin me just to buy ebay exhaust. i was thinken just get it custom or somethen what do you guys think ? ? ?


capwred
Posts: 598
Joined: Thu Jul 28, 2005 3:43 pm

Post

i have a buddy running the ssauto duals on his 240sx and its sounds good and also its built nice.alot better then the other stuff they sell.but remember they dont build most of the items they just sell most of them.so i say go for it.

nnkfws333
Posts: 723
Joined: Tue Jul 23, 2002 5:29 pm
Car: 2004 Infiniti G35 and a 1989 Nissan 240SX

Post

Im running SSautochrome dual N1's they sound nice but only problem is they sit too low. I scrape on certain speed bumps and low dips on the road =(

capwred
Posts: 598
Joined: Thu Jul 28, 2005 3:43 pm

Post

just about any after market exhuast does that on the 240sx.

89'ClubK's
Posts: 244
Joined: Fri Mar 17, 2006 7:26 pm
Car: 89' Nissan 240SX

Post

I'm running the Tanabe SMR exhaust, and I had to cut and weld the two rear peices that connect in order to bring the exhaust up. Thier is no subsitute! My brother and friend run Blitz and Buddy Club, and those two units sit up right against the bumper. Don't skimp out on your exhaust, especially if it isn't stainless. Buy a quility JDM exhaust!More power, better note.

User avatar
Tyson240sx
Posts: 46
Joined: Sat Jul 30, 2005 12:42 pm
Car: 240sxca18det
Contact:

Post

but if the
89’ClubK’s wrote:I'm running the Tanabe SMR exhaust, and I had to cut and weld the two rear peices that connect in order to bring the exhaust up. Thier is no subsitute! My brother and friend run Blitz and Buddy Club, and those two units sit up right against the bumper. Don't skimp out on your exhaust, especially if it isn't stainless. Buy a quility JDM exhaust!More power, better note.
but 3" exhaust is 3" exhaust the only difference is wether its stainless or not.?? i aint putting a cat or muffler on it just pipe. so it will flow nicely. So i could pretty much just get my own custom **** made. as long as its 3" stainless it'll all flow the same???

89'ClubK's
Posts: 244
Joined: Fri Mar 17, 2006 7:26 pm
Car: 89' Nissan 240SX

Post

I'd imagine. You should be able to find a shop that can bend 3" piping.Just make sure it's stainless. I never could figure why the JDM catbacks are so much, until the cheap exhaust I ran on other vehicles would rust out each winter. If you don't get snow or salt, thats great! A friend runs "garage special" 2.5" on his SR. Sound OK. Good Luck!To each his own.


Return to “CA18DE / CA18DET Forum”