E6 ECU is only for blacktops?

Post by **CMG** » Mon Sep 03, 2007 6:37 am

As the question says, an E6 ECU can only be used for a black top correct?

Post by **SpeedRacer1** » Mon Sep 03, 2007 6:01 pm

You can use it on a redtop, but it is meant for an automatic S13 blacktop.

Post by **Hijacker** » Mon Sep 03, 2007 6:20 pm

I use an E6 on my redtop just fine.

Post by **CMG** » Tue Sep 04, 2007 6:33 am

Hmm, so the E6 came from auto black and I believe the E5 is the manual one. I'm using the stock red I think #62 right now. I was just gonna get the E6 as a back up.

Post by **hkssupratt1994** » Thu Sep 06, 2007 7:41 am

mine can with an E6 will it idle really high and can i adjust is down?

Post by **Hijacker** » Thu Sep 06, 2007 7:46 am

My motor idles at 750 rpms. If it's high, adjust it down the usualy way. The adjuster screw on the intake mani.

Post by **needforjdm** » Fri Sep 21, 2007 10:45 pm

E6 = Auto blacktop zenki S14E5 = Manual blacktop zenki s14

E6 will run on 5speed s14. only the idling issue!

Post by **blkvrtswp** » Fri May 13, 2016 9:15 am

needforjdm wrote:E6 = Auto blacktop zenki S14
E5 = Manual blacktop zenki s14

E6 will run on 5speed s14. only the idling issue!

Blast from the past - this info above is INCORRECT.

E5/E6 is for S13 SR20DET blacktop NOT S14 SR20DET Zenki.

Will work on redtop S13 SR but will NOT work on any S14 SR.

Just figured I would clear this post up.

E6 ECU is only for blacktops?

E6 ECU is only for blacktops?

Re: (SpeedRacer1)

Re: (CMG)

Re: (hkssupratt1994)

Re: E6 ECU is only for blacktops?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums