E-manage help one more time

[LEMHEAD16]

Okay last wire on the emanage is the TPS wire, Problem is i can't find it at the ECU. My wire diaram says it is a white wire. It is at the TPS sensor but none of the white wires at the ECU show voltage or continuaty(SP). I am lost any ideas? BTW its an 89 SOHC

Josh

[LEMHEAD16]

I installed the unit but my RPM bounces around alot on the REal time viewer. It reads like 5700 when I am holding the RPM at a steady 3000. I also cannot get my TPS to read anything other than .64 -.65 volts. I know the TPS sweeps from .64 to 3.5 volts though at the sensor? Any Ideas

[DRIFTEADOR]

are you getting any codes from the emanage unit? or is it just a solid green?

[LEMHEAD16]

No codes from the unit. That is the first thing I checked. I get a solid green light on the unit and the support tool!

[LEMHEAD16]

TPS problem Solved. I wried the igniton wires into the TPS wire for some reason! now my last question is which wire does the ignition harness tap into. I am assuming it is one of the coil wires. There is a LG/B wire that goes from the ECU through a power transistor and to the coil that is 12 volts with the key in the run position. The other wire is B/R and goesfrom ECU to COIL and I get no voltage on it.

Does anybody know which one to cut and wire the emanage to?

[LEMHEAD16]

It's the LG/B