E-manage harness wires
-
PapaSmurf2k3
- Site Admin
- Posts: 19003
- Joined: Thu Nov 21, 2002 3:20 pm
- Car: 2017 Corvette, 2018 Focus ST, 1993 240sx truck KA Turbo.
- Location: Merrimack, NH
E-manage harness wires
Ok, I got my used e-manage, but the previous owner (we shall not disclose any names) had the wires in the harness wrong. I tried pulling on the wires to get them out of the harness but they wont budge. I removed the little white "guard" thingy but they still wont come out. Does anybody have any secrets to getting these lil'bastards out? if not I have enough extra wire to just cut the ones that are not used and run new wires. Thanks!
-
PapaSmurf2k3
- Site Admin
- Posts: 19003
- Joined: Thu Nov 21, 2002 3:20 pm
- Car: 2017 Corvette, 2018 Focus ST, 1993 240sx truck KA Turbo.
- Location: Merrimack, NH
Oh, PS- does anybody know where the TPS plugs into the e-manage harness, and any other wires besides the ones listed at this site http://www.mohdparts.com/emana...g.gif
for ignition and injector control.
for ignition and injector control.
its so funny you posted this. I spent a good 15 minutes removing a wire from the emanage harness yesterday. talk about a pain in the ***!
1. remove the white thing2. Get a paperclip (the thinner the better) and unbend it, then stick an end (from the rear of the connector) along top of the single metal connector you want to remove. Now, push the single connector out by sticking something in there via the front of the harness thingy.
Hey man, sounds like we need to join forces on this stuff. I got your AIM and will hit you up some time. I got my injector stuff wired up yesterday but am having some funky probs with it. gotta re-wire it today. Havent attempted the ignition crap yet cuz I dont know what wires im supposed to be looking for.
My AIM is jessmaloney (e-manage on a 93 KAT)
1. remove the white thing2. Get a paperclip (the thinner the better) and unbend it, then stick an end (from the rear of the connector) along top of the single metal connector you want to remove. Now, push the single connector out by sticking something in there via the front of the harness thingy.
Hey man, sounds like we need to join forces on this stuff. I got your AIM and will hit you up some time. I got my injector stuff wired up yesterday but am having some funky probs with it. gotta re-wire it today. Havent attempted the ignition crap yet cuz I dont know what wires im supposed to be looking for.
My AIM is jessmaloney (e-manage on a 93 KAT)