-E Brake light Buzzing-

Information on the naturally-aspirated KA24E and KA24DE engines.
S13FX
Posts: 1892
Joined: Sat Apr 30, 2005 10:59 am
Car: '69 l20b Dimeski :)

Post

I know I already searched for this and tried everything.

Basically my ebrake light is on only before certain rpm and it also gives out a buzzing noise but once im passed like 2k rpm it goes away until the RPMS drop. Now it didn't used to do that until recently.

I checked my Brakes their fine, the plug to the MBC is fine, there is more then enough fluid. I also read somewhere that it might mean something about the charging system but I don't seem to be having any problems with the alternator charging the battery or any of my lights working.

Any more ideas?


User avatar
shpaintball
Posts: 801
Joined: Thu Jul 20, 2006 11:15 am
Car: 90' SOHC 240sx RIP, 92 DOHC KA project STOLEN 87 FC RX-7 TURBO ...93 KA died...89 SR20 DD..08 Titan new toy

Post

unplug the battery....for couple hours...24hrs and it will reset ecu....try ecu dianostics....and brake lines could be having an issue...not sure.....mine where low and my light went off....try the battery tho....

S13FX
Posts: 1892
Joined: Sat Apr 30, 2005 10:59 am
Car: '69 l20b Dimeski :)

Post

My Breaks work fine, there is perfect fluid in there power steering it fine alternator is fine, and battery is brand spankin new. The light only goes on when Im under like 2.5k rpm then it goes away when I go past it.

doubleg69_96
Posts: 6
Joined: Sun Jan 02, 2005 7:42 am

Post

check the engine control fuse (eng cont 10A) thats located in the fuse box next to the battery. its probably blown. i had the same problem then i checked that fuse and it was blown; replaced it and the car handled much better.

User avatar
S3t0_S13
Posts: 4526
Joined: Tue Dec 13, 2005 2:24 pm
Car: Of Nothing But FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL FAIL
Contact:

Post

shpaintball wrote:24hrs and it will reset ecu....
takes that long 2 reset the ECU?


Return to “KA24E / KA24DE Forum”