Dynoed my car and am baffled by the results... !

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
chezicrator
Posts: 26
Joined: Sat Apr 02, 2005 8:23 am
Car: 93 240sx w/ redtop

Post

Ok so I took my car to the dyno yesterday and I'm truly at a loss of words here.

At 14.3 psi I made 194HP !?!?! That seems insane to me...

Here's my setup.

redtop sr20detgreddy fmic3inch piping, downpipe, exhaust (hks hi-power)koyo radiatorhks bovsafc2

The funny part is I had just swapped in a brand new t25 before getting the dyno runs.

I could take a picture of the dyno sheet, but I don't know how to host pictures.

Are these numbers normal? The car seems pretty quick now which leads me to believe that dyno might have been busted.

Am I mistaken or isn't the 240+ range more appropriate for 14 psi on a t25?


HailtotheSilvia
Posts: 397
Joined: Tue Jun 29, 2004 11:39 am
Car: 93 S13 coupe

Post

check your timing

User avatar
luv2spedup
Posts: 615
Joined: Mon Jan 10, 2005 11:06 pm
Car: 89 silvia

Post

240+ sounds about rite

User avatar
NoStickers
Posts: 840
Joined: Tue Jun 17, 2003 5:00 pm
Car: 1991 240sx w/ sr (RIP)
1989 240sx w/ ka
1996 240sx donor car (coming soon)
Location: Ft. Bragg

Post

Ya there is definitely something wrong I made more with my t25 at 7psi lol

User avatar
95lstegman
Posts: 501
Joined: Tue Nov 01, 2005 8:09 am
Car: 1989 570SX, 2005 Acura RSX, 1994 Toyota Corolla

Post

before you go jumping to conclusions, you NEED to tell us what dynomometer measured this. some dynomometers read lower or higher than others, by a LOT sometimes depending on model. it should say on the dyno sheet. if by some chance it doesn't, call the place that did the test.

Structure240sx
Posts: 5615
Joined: Sun Oct 06, 2002 5:04 pm

Post

what were your afr's? was boost kicking in like normal? possible boost leaks?


Return to “SR20DET Forum (rear-drive)”