Dyno Results + Turbo Combination

[WDRacing]

I'm going to build a turbo vs WHP database. I'd also like to have a thread strictly dedicated to Dyno results and various working combinations. So if you have dynoed your car, no matter how much or how little, please post up the results. It doesn't matter if you have a dyno graph or not, but I'll be editing out anything I think is BS. But you must post your setup at the time of the dyno, simply posting a setup without dyno results is useless and so is just posting a dyno slip with no setup.

Also, I'll be editing this thread so that it only containes posts with someones personal setup and dyno information. So please don't ask questions about someones setup, I'll only have to delete it. Posts will be deleted without warning, so if it disapears, its because I felt it didn't belong.

Thanks guys!!

WD

[Chris@AMS]

Here's some stuff from me.



Dyno chart above is with AMS GT32 Turbo kit .63 A/R housing, AMS Crate motor, and BC Stage 3 cams. Boost level is 20 dropping to 18-19 psi



Dyno chart above is with AMS GT32 Turbo Kit .48 A/R housing on our, AMS Crate motor, stock s14 cams and the boost levels are 10, 15, and 21 dropping to 19-20 lbs.

[NateDogg]

Here is my setup:-Turbonetics ball bearing T3/T04E 57 Trim .50 A/R Compressor .63 A/R Turbine-555cc Nismo Injectors-Enthalpy Tune for 93 octane (I run 94)-Oil catch can a la beesandgoats.com integra kit-PWR A/A FMIC-2.5" IC pipes-HKS SSQV (Re-circulated)-Stock ignition-Aurora plug wires-NGK BKR6E plugs at .032"-3" DP-2.5" dynomax cat-Stock cat-back-3" E-cutout before cat

240whp at 7psi through stock exhaust (cutout closed)286whp at 9.5psi through open cutout

[S-14boy]

Heres mine.Greddy Kit w/ ICSpec stage III clutchFidanza FlywheelGreddy Type S BOV

http://i60.photobucket.com/alb...O.jpg