Dyno results

[Colton]

I finally went to our local dyno (Mustang) and did 3 pulls. I need to buy a new wastegate because it still creeps (cheap ****ty ebay variety), but I did lay down.

397.5 whp @ 7000 (intercooler pipe blew off)300.5 lbs @ 7000 (intercooler pipe blew off)

my A/F's were 11.1-11.5

This was done at 18lbs of boost (boost controller was set at 15 and it creeped to 18)

I richened up my SAFC 2 slightly, but for the most part I relied on a retuned ecu (Redline Performance).

My main mods are,

HKS Cams 264/264Precision Turbo SC-61Nismo 740cc injectorsZ32 mafsTop Speed intake manifoldGreddy front mount intercooler

This setup had atleast another 25 whp in it, the dyno pull before this one yielded 376 whp @ 6500 (I got out of it early because I'm a wuss)

I'm pretty confident we can lay down 450 whp @ 7700 with 20 lbs of boost !!

My brand new tial 38mm comes in next week, I'll post new results as soon as I can.

[Colton]

This is my sleeper... check out the sweet blizzaks on the fronts!!!

[BaliLover]

ANy dyno sheets, I'm curious to see what your powerband looks like with that setup. Also, what front end are you running on your car?

[Colton]

I don't have a scanner, but my curve looks like crap because of the boost creep. the power and torque never truly level off, it just keeps climbing. I got the front end from a shop in minnesota, I believe it's a VIS. I'll post a better pic of it.

[virus77]

hows the ECU been treating you, ive been eyeing them lately. Nice number too.

[USsil80]

are the cams you are using step 1 or 2 ..... nice numbers by the way... what was you max tourque and at what rpm did you get it at...

[BaliLover]

What RPM does your turbo reach max spool at?

[Colton]

Max torque was 300 lbs @ 7000rpm (boost creep owns me).

HKS step 2 cams 264/264 (we didn't mess with the cam gears yet)

My turbo reaches full spool a hair before 4500 rpms

The Redline ECU is awesome, khiem, the owner is always on standby to help you out. I took a chance and saved $150 ($350 opposed to $500), got my ecu in three days (from when I sent out to when I got it back). Khiem is an excellent tuner and is willing to work with you to specifically tune your ecu to your needs. I told khiem I wanted something safe that would be good to 500 whp, he did just that!

If you tell Redline (khiem) that Colton sent you he will give you a small discount off of his $350 price!!

[virus77]

thanks brotha

[JDMracer16]

Nice numbers, what kinda wheels are those?

[Colton]

The wheels are real Enkei 92's.