TITLE:Dyno Day @Wired Electronics DATE: May 24th, 2009TIME: 9am-last carWHERE: Wired Electronics601 East Edgar Rd Linden, NJ 07036(1&9 S Bound) (Exit 13 from the NJ Turnpike)
CONTACTS: [email protected] DESCRIPTION: Dyno Day @ Wire NJDynapack Dyno FWD/RWD3 Pulls--->20dollars3 Pulls/wideband -->45dollars
NOTE:All Runs/dyno meet will be HD video taped and uploaded to Vimeo/Youtube. It's mainly 240s but if you have a buddy or two that wants to dyno gladly welcome.
Post up about dyno/going/verify etc. List1-Whitenoise (Nino) Ka2-AKINASpeedStars(Arthur) Ka3-my_S14drpspntys KA4-Teh St1g(Arjun) KAT5-UsJdmtuner(Mel) KAT6-Rockstar(Alex) KAT7-MTX450(Dane) KAT8-180sxdrifter(Paolo) KAT9-turbo_dreams (ragib)KAT10-DevilMB3017(steve) KAT11-240tuned91 KAT12-Zenki_Eddy(Eddy) SR13-lifewater(Joe) SR14-Ultrablack240 (Paul) SR15-JohnnyDrifter22 SR16-zerowkewl SR17-smellslikecurry (autri) SR18-nuffboost (Craig) RB19-SR20_Nector SR20-RUTH'LESSLS2
Modified by KFL at 1:00 PM 5/16/2009
Dyno Day Mat 24th@ Wired in NJ
-
DevilMB3017
- Posts: 1639
- Joined: Thu Sep 14, 2006 7:25 am
Re: (DevilMB3017)
Cool, steve... do it. I need to see a built ka with a similiar turbo setup. A buddy of mine with a built ka is dynoing also but just a t28 setup. Should be a good match SR,RB,KAT..maybe i'll make a prize of some sortDevilMB3017 wrote:Got your e-mail Alex. You can throw me on the list, I should be able to make it out.
-
DevilMB3017
- Posts: 1639
- Joined: Thu Sep 14, 2006 7:25 am
Just some updates since you saw the car last Alex...
1) It's got a test pipe now. The better breathing lets me hit 21 PSI instead of high 17s.
2) A new manifold will probably be going on before this - well, a stock manifold, but with the secondary butterflies and whatnot removed. This should help flow a little better.
I'm hoping to squeeze out somewhere in the ~350rwhp range.
1) It's got a test pipe now. The better breathing lets me hit 21 PSI instead of high 17s.
2) A new manifold will probably be going on before this - well, a stock manifold, but with the secondary butterflies and whatnot removed. This should help flow a little better.
I'm hoping to squeeze out somewhere in the ~350rwhp range.
Re: (DevilMB3017)
Very nice!! 21psi nuts.. you should hit that with no problem over 350hp. Quick question whats your fuel pressure set at.. My fuel gauge for fpr arrives tommorow.
Re: (KFL)
throw me on the list, i have a stock ka with an intake and 3 in exhaust from the header back and i want to get stock numbers before i start my kat build this summer
Re: (johnny5)
Just show up.. list was just to get a decent head count.. A few guys dropped off now.. at around 16,now 17guys. Just show up
