dual cam in pignose INJECTORS NOT GETTING SIGNAL

[motoman399]

so my friend put a dual cam in a pignose and it has not ran in 3 years till the other day he put the right harness in and i put in a working distributor and it fired up for about 10 seconds. then it died. i tested the spark. its getting spark perfect, i tested the injectors. they are not getting ground signal when cranking. it has two positives (like a positive on the black wire and a positive on the red wire) anybody have any idea what to test next. i was thinking a relay but i have no clue which one. thanks in advance!

[motoman399]

BUMP seriously... No one??

[motoman399]

nothing??? no body knows what to check if your injectors arent getting signal??

[rioredstang]

I don't know if you have fixed it yet, sounds like a cam sensor problem. Cam sensor is in the dist. Have you tried to pull codes from ECU? Check grounds to engine block.

[smatt13coupe]

ecu. an put u side marker bulb in the injector clip in seee if it flashes. the one wire should have constant power