dropping resistor/ resistor pack for injectors, whatever its called!!

[gawdzilla]

Hey guys, just wondering what you guys are doing about the resistor pack/dropping resistor for the fuel injectors. Mine clip didnt come with that magical silver box, but I've been doing some research on what resistance/watt rating the resistors should be.

so far, from looking at jim wolf's webpage, it looks like the resistors are 6.8 ohm, 10 watt. I might just solder up my own resistor box, so the ECU can see high impedance. Anyone know of cheap resistor packs to get or what resistance i should be going for (if im wrong)?

How about resistor packs from other cars... i.e. hondas, DSMs, etc.?

Thanks in advance guys

[accel junky]

Did you just not get it? or is your 26 supposed to have the built-in system like the SII Rb25?

[gawdzilla]

didnt get one with my clip. the 26 needs it to run low impedance injectors.

[BoostFab]

i found this site sell them, $2.28 each package of 2 resistors. click me

another cheaper place, $1.25 each package of 2 resistors. click me

i also saw some 10watt resistor at radio shack

i've heard that you can wire it inline with one of the injector wire, but i'm not sure which side. i think it's on the ecu pulse signal wire, not the 12v power wire.


Modified by BoostsFed at 4:26 PM 12/25/2004

[themadscientist]

300Zx VG30DETT one is the same thing, hit the junkyard.

[Yellow4g63]

Good info mad.

[accel junky]

But is the Z32 one pinned different?

[Carl H]

v6 accura ledgends have dropping resistor packs.each resistor measures a hair under 6ohms, got mine for 5$.

[gawdzilla]

yea, im thinking any 6 cyl resistor pack will work

[BoostFab]

300Zx VG30DETT one is the same thing, hit the junkyard.

isn't the VG30DETT injectors are already high resistance, so it doesn't use resistor packs?????