Driveline vibrations?

Nissan 300ZX technical discussion forum: Maintenance, performance, installations, modifications, how-to's and troubleshooting.
User avatar
mac_daddy
Posts: 180
Joined: Wed Apr 01, 2009 6:50 am
Car: 92 slicktop n/a

Post

I've just started experiencing a massive vibration between 15-25 mph and was thinking could this be the driveline? how would i go about checking this? i've heard something about the carrier bearings going out how do i kno if mines bad?thanks


User avatar
evildky
Posts: 14225
Joined: Sat Jan 31, 2004 9:23 pm
Car: 71 Datsun 240ZT
87 Nissan 300ZX N/A-T
06 Nissan 350Z GT
Toyota Tundra TRD RW
Location: Louisville, KY
Contact:

Post

the carrier bearing is a common issue, if you can move the driveshaft by hand the bearing is bad

User avatar
mac_daddy
Posts: 180
Joined: Wed Apr 01, 2009 6:50 am
Car: 92 slicktop n/a

Post

as in loosin the bolts by hand or just pull apart the driveshaft? it's probly better to just replace the whole driveshaft with a one piece if its bad right?

alright2020
Posts: 605
Joined: Mon Oct 27, 2008 2:11 pm
Car: 92 jeep wrangler with SBC
99 F250 with 7.3 on 25lbs
91 300ZX na>tt>na
03 G35 coupe

Post

just hop under the car and grab the driveshaft and try to move it...if you can then the carrier bearing is bad...you could also have bad ujoint but those you wouldnt be able to tell jsut by trying to move it... and yes you woudl have to replace whoel shaft

User avatar
mac_daddy
Posts: 180
Joined: Wed Apr 01, 2009 6:50 am
Car: 92 slicktop n/a

Post

cool thanks. thats what i've been hearing from other people to is just trying to move it in gear and turn the wheel see if theres any play. i'll probly jack it up in a lil bit and check.

User avatar
mac_daddy
Posts: 180
Joined: Wed Apr 01, 2009 6:50 am
Car: 92 slicktop n/a

Post

Ok so i check my driveshaft. Jacked up the car put it in gear tried to spin the driveshaft and wiggled barely at all like a driveshaft normally does i believe. so what about the u joint? how do i know if that is good or bad? i'm almost positive this vibration has to do with the driveshaft..


Return to “300ZX (Z32) Technical”