Drag strip results

[V8slayr]

Not too good of a night. This was my first time trying to really launch the car on these slicks and I fought w/ them all night. Also, I kept having issues with the car cutting completely out between gears and falling on its face.My best time:

60 ft- 1.803330ft- 5.3111/8et- 8.03MPH- 90.27

Really disappointed not to see a 7 sec pass, but dammit I was close. If the car hadnt fell on it's face and if I could pull a 1.7 or 1.6 60ft I think the car will run 7.8 or better at 91-93 hopefully. This was done at 17 psi

[DrifterProdigy85]

With the slicks, What were you having the most problems with? Ive always heard that with slicks you gotta rev high and ride the clutch out for a smooth fast launch.

[jr_ss]

1/8 mile strips suck... Even if it wasn't what you wanted to see, those are good times.

[V8slayr]

Keep in mind these are not true drag racing slicks. They are autocross regular radial construction tires. I was running around 20 psi in them. I was launching from 5500-6000. Most of it was my fault, just not being able to figure out exactly how to get it right. My next time out I should have some better luck. My buddy (garagelu) showed my a** up tho. He was able to pull a 1.7 60 ft. on his Bridgestone RE01-R's.

I really wanna get it to a 1/4 track though. I plan on upping the boost to around 20-22 psi w/ race gas.

[Sil80315]

damn id be happy to hit a 1.8 60ft. The lowest I could get with street tires was a 2.0 60ft with a 13.4 1/4 103.5 trap, stock sr with BPU at 13psi t25 with an open dif *rolleyes*

theres some s13 srs with BPU hitting high 12's with some lcd's and drag radials

Im hope to be in bottom 12's high 11's with my set up

1/4 is where its at