Dope Tiida from Speedhunters

[HashiriyaS14]

Not sure if you Versa cats caught this or not:



http://speedhunters.com/archiv....aspx

[Atx_Versa]

(speechless)

[1_Sleek_Versa]

Nice.

Now I know what my Versa looks like slammed and BBS wheels. lol

The car is tits!!!

[silverarrow27]

I'm assuming they came in 5 lug outside of N. America? Either that or the owner of that car used spacers with conversion kits found on ebay.

[1_Sleek_Versa]

^^^^^Good call sir!

I was so drooling on the wheels and drop I didn't even notice this. lol

[reyes1212]

I'm assuming they came in 5 lug outside of N. America? Either that or the owner of that car used spacers with conversion kits found on ebay.

Can you direct me to a DIY so that I can do this?

[silverarrow27]

http://cgi.ebay.com/ebaymotors...A1308

[themadscientist]

Sharp, easily the best example of a Tiida I have seen.

[blindsnyper]

Can you direct me to a DIY so that I can do this?

http://cgi.ebay.com/ebaymotors...A1308

since the versa needs about +40 offset and the spacers are 50mm, you would need to find wheel that are about +90 offset in order to be flush. and depending on the width maybe more.

(i think, please tell me if im wrong)

[williamk10]

Nice Tiida...suprised to see someone put BBS wheels on one...must be baller

[Rex]

since the versa needs about +40 offset and the spacers are 50mm, you would need to find wheel that are about +90 offset in order to be flush. and depending on the width maybe more.

(i think, please tell me if im wrong)

I recently sold a set that were only 25 mm, and it's possible to find them even as low as 20 mm. I'm thinking that would almost solve the stock look fitment.

[superskunk]

+38 7 1/2 works for the front, i think the backs would have to be +36 or lower to bring it flush in the back.... i think those rims are 19's....

[reyes1212]

Dang crazy so then a +90 offset is what would be needed for this to be flush...hmm sounds too easy.

[Bubs daddy]

I thought I was going to see a Tiida confiscated at a Border Patrol checkpoint with kilos stuffed in the dash.

I guess I'm not up on the pop slang...

[blindsnyper]

Dang crazy so then a +90 offset is what would be needed for this to be flush...hmm sounds too easy.

really???

[Riceball88]

That is easily the nicest Versa I've ever seen. I want that lip kit!!

[Rex]

Dang crazy so then a +90 offset is what would be needed for this to be flush...hmm sounds too easy.

No, no no ... Sorry.

I don't know the wheel sizes and offsets for the Versa, but with or without spacers, I can't imagine there's any way it would need +90's to be flush???

[silverarrow27]

since the versa needs about +40 offset and the spacers are 50mm, you would need to find wheel that are about +90 offset in order to be flush. and depending on the width maybe more.

(i think, please tell me if im wrong)

It's more like 40 + 50 mm = +90 mm offsets. That means you would need a rim with +50mm offsets to bring it back down to 40mm offsets.

Not too hard to find.

[ADOversa]

That is SICK

[metallickirby]

What spoiler is that? OEM? VIS?

[Guyana]

so i just for this one could not help but share



http://speedhunters.com/archive/2011/10 ... -pt-4.aspx

this what I found it on wish there was more info really would like to know wheel size and suspension he is running

http://speedhunters.com/archive/2011/10 ... -pt-4.aspx

[silverarrow27]

Good that it made it on there, but the wheels just aren't my cup of tea.