Done but still not running ...............PICS

[preston240sx]

pretty much done except for a few little things ...and the fact that it does run but car is pretty much put back together so now the guys at neotech can take a look and see what wiring problem is going on,,,,



ps yes i know the piping on the right is pvc just a temp fix untill i can get one made needs alittle shifting of the front bumper but all seems well

[Cameron]

that pvc wont last long at all, it will swell up and break, prolly on the first hard run.

[preston240sx]

yeah i know its more of a way to show the shop what i need made up guess you could call it a mock up either way it does'nt run yet and its going to the shop soon so hopefully theycan take care of it

[Cameron]

oh ok i gotcha. goodluck gettin it running, hope its what you want.

[Bwana]

that pvc wont last long at all, it will swell up and break, prolly on the first hard run.

Not so. Read this thread and you'll see, I have extensive first hand experience . I wouldn't recommend it for a long term solution, but mine didn't melt until the 8th lap on the west course at Miller Motorsports Park on a tune so lean the plug wire nearest the turbo caught on fire....

[matafied]

yea i had it on my daily for about 4 years i even put down 275 rwhp at 10psi when i was adj the boost it seen 22 psi spikes and didnt hurt it one bit. but it aint gonna swell up and break, its fine for a temp

[kevinarich]

is that pvc or abs? abs is not pressure rated. I hope you painted that, but it looks like abs molds to me