Don Nguyen | **Vinyl Roof Wrapping Services and more!**

[Don Nguyen]

As a new vendor on the forum, I am offering a special promotional deal for the first couple of Altimas who are interested in getting their roof's wrapped with some gloss/matte black or carbon fiber vinyl. I currently don't have any pictures of previous Altimas that I have vinyl wrapped, hence this thread reaching out to you guys to get some interest. This helps everyone out. You get a discounted rate and I get to posts pictures up on here for everyone to see how it looks. (Shoot me an E-mail for details on pricing, as pricing is different depending on finish, specific car, etc).

I've done hundreds of cars at this point. Here are just one or two quick pictures of cars that I've done recently in each type/finish, just to give you guys an idea of how it looks like and the quality of my work:

Gloss black -





Matte black (looks like the same car, but it's actually a different one) -







3M Di-Noc Carbon Fiber -





For locals, I can supply the materials and do the entire installation at my location, for anything that you need to get done.

However, if you're a non-local (or someone who just wants/needs some material) and would like to give a DIY a shot, I can sell you just the material as well.

- Gloss/matte black roof vinyl (other finishes/colors are available upon request)
- Carbon fiber vinyl
- Black out window trim vinyl
- Interior/exterior trim
- Headlight/Tail light tinting
- Full car wraps
- Installations
- And More...

Let me know if you guys have any questions or if you are interested in anything.

thanks.

-Don

[email protected]

[Hussain]

Where are you located? I'm not interested in wrapping my roof but if your on the west coast (phenominal is already on the east coast) some cali people would probably do it.... I'm interested because in a few months i might get some work done if you're not too far away.

[Don Nguyen]

Just updated my profile. I am in Orange County. I travel up to norcal every once in a while to do vinyl work as well.

-Don

[LongBeachCoupe]

Just an FYI guys, Nguyen is pronounced WIN!

[Don Nguyen]

That's right, haha.



I know this isn't a Altima, but I wanted to post pictures of it anyways, because it's not too often that I get a black car coming by to get their roof wrapped. It is a black G37 sedan that I vinyl wrapped the roof in the 3M Di-noc matte carbon fiber finish. It gives it a nice contrast. From far away it looks flat-ish, but once you get up closer, you start seeing the design and carbon fiber weave pattern. The owner of this car was from around south Orange County I believe.

Also, I am having a discounted special on all 3M dinoc carbon fiber installs right now as well. So hit me up if you're interested. Now's a good time to get it done.











-Dom

[email protected]

[Don Nguyen]

I know some of you are more of the visual type, so in addition to black roofs, I also black out chrome pieces such as chrome window trims, like on this car.

I had this new white Mercedes Benz C class coupe come by to have me wrap his chrome/brushed aluminum window trim in my gloss black vinyl material. He wanted to go with the gloss black to match the glass panoramic roof and to also match the B pillars on the door, which were also gloss black already from the factory. I should have taken the after pictures of it outside so you guys can get a better view/look, but for some reason this time I took the pictures of the car inside. The owner of this car was from around Buena Park and drove out to me in Anaheim Hills/Orange County to get the work done. I have a lot of guys ask me if they should go with matte or gloss black on their window trims, so hopefully this will help those of you out trying to figure what to go with.

Before




After










-Don

[email protected]

[ShadowAC]

Don, im looking at maybe wrapping my coupe and need some vinyl come summer time, do you sell vinyl alone since you buy bulk.

i was hopping i could get the friendly NICO deal lol

but i live in SD so i dont mind going up to orange to get it

[Don Nguyen]

Yes, I do sell materials as well for people who want to try and DIY it. Just shoot me an e-mail when you're ready to order some.

-Don

[ShadowAC]

ok will do, thank you

[downedzephyr]

orange county huh? i might have to do a 3M Di-Noc overlay...

[mmx23z]

Just updated my profile. I am in Orange County. I travel up to norcal every once in a while to do vinyl work as well.

im definitely interested whenever u do come up to norcal

[Don Nguyen]

Shoot me an e-mail to [email protected] and I'll keep you on tab to contact once I do figure out when I am up there.

[Don Nguyen]

This time around, I went with a lighter shade than the usual shade that I have used in the past for when I tinted/smoked head lights/tail lights. I chose this shade to closer match a tint/shade that you would expect to see as a dealer or factory option. I basically would describe this as an OEM+ look. For those who are familiar, it's similar to the blackline tail lights that BMW offers or the Porsche tail lights that come from the factory with the clear portion tinted/smoked already. Hopefully you guys will be able to get a good idea of how this shade looks like on these tail lights from the pictures that I took. Let me know if you guys want any specific angles or more pictures and I'll see what I can do.

Left factory - Right tinted


Both tinted/smoked






Tinted/smoked - after


Tinted/smoked - before


-Don

[email protected]

[PHENOMenalVinyl]

Awesome to see!!!! now I have a guy to send people to who are in Cali Add my facebook page Facebook.com/PHENOMenalVinyl Love that your promoting here!!!

[Don Nguyen]

Thanks. I'll do the same for east coast guys.

Here are some pictures of a new black BMW F10 5 series that I vinyl'd the chrome window trim with my matte black material to resemble the BMW factory shadowline trim look. I had some people ask for some closer up pictures of the wrap around the edges, so here they are. Let me know if you guys have any questions or other picture requests.

















-Don

[email protected]

[sprblk]

Damn, nice work man. I love the chrome->flat trim. Wish I had someone down here in FL. Brings me to my next point, anyone know of a good shop in southwest Florida?

[Don Nguyen]

Damn, nice work man. I love the chrome->flat trim. Wish I had someone down here in FL. Brings me to my next point, anyone know of a good shop in southwest Florida?

Sorry, unfortunately I do not.

-Don

[RicerX]

Welcome, Don! You have done some really nice work. You and Matt are holdin it down in the vinyl world! Looks like the AC forums have east and west coast covered. lol

[PHENOMenalVinyl]

^ love it