does neone wire like this??

Discuss the RB20, RB25 and RB26 series engines.
User avatar
shally2186
Posts: 408
Joined: Tue Oct 30, 2007 10:19 am
Car: S14.5
Location: Pittsburgh PA
Contact:

Post

these resistors are wired on the left side of the wires goin into my ECU..theyr are six of them..is this the right???


Darius
Posts: 4820
Joined: Sun Mar 02, 2003 9:48 am
Car: RB25DET S14 - 665 WHP (SOLD)
Location: Chicagoland

Post

Those are probably the resistor packs to your low-impedence injectors. There's the answer to one of your questions. Check to see if they are on the correct wires/pins on the ECU.

User avatar
shally2186
Posts: 408
Joined: Tue Oct 30, 2007 10:19 am
Car: S14.5
Location: Pittsburgh PA
Contact:

Post

well they are soldered and shrink wrapped in place so they should be alright...is that the right resistance for my injectors?

Darius
Posts: 4820
Joined: Sun Mar 02, 2003 9:48 am
Car: RB25DET S14 - 665 WHP (SOLD)
Location: Chicagoland

Post

yes. you should be good to go.

User avatar
shally2186
Posts: 408
Joined: Tue Oct 30, 2007 10:19 am
Car: S14.5
Location: Pittsburgh PA
Contact:

Post

THANK YOU DARIUS!!! love hearing them words

User avatar
BoostFab
Posts: 3529
Joined: Wed Dec 03, 2003 8:23 am
Car: S13cp, S13fb, S14z
Location: Nismo Land
Contact:

Post

those are injector resistors, so that low impedance resistors is use. i would have done it at the injector harness, to relieve the clutterness at the ecu plug.


Return to “RB20DET / RB25DET / RB26DETT Forum”