Do I need Z32 spindles for e-brake w/ 300zx brakes?

[curbsurfer253]

I'm putting some 300zx brakes on the rear of my S14. Do I need Z32 spindles and lines to keep my e-brake working?

[SoCalS14]

No spindles, but you do need the backing plates, which contain the e-brake mechanism, in order to retain the e-brake. You might also want to obtain the e-brake cable from the 300z.

[curbsurfer253]

what do you mean by backing plate? the rock gaurd thing directly behind the rotor? can someone else confirm this before i go out and buy the stuff.

[crzycav86]

Yes that would be it. The e-brake is integrated into the dust shield.

[chuckie500]

ok i just installed the 300z brake up grade on my 1995 240sx, all the parts i got are from a non-turbo z so these are the 26mm rotors. which handbrake cable do i use since the one that came with it is too short and also can the twin turbo z calipers fit on my non turbo rotors

[Nissan-S14]

ok i just installed the 300z brake up grade on my 1995 240sx, all the parts i got are from a non-turbo z so these are the 26mm rotors. which handbrake cable do i use since the one that came with it is too short and also can the twin turbo z calipers fit on my non turbo rotors

i hope you got this too!!

Z32 - BMC

[SoCalS14]

The stock M/C will not be very effecitive against 12 pistons....

[Nissan-S14]

and make sure to use some dot 6 brake fluid!