Question.When boring .020 over, is it necessary to resleeve the cylinders or is it fine to just bore the stock sleeves?Also this may have been answered already, but when using aftermarket pistons and rods is it necessary to have the crank balanced?
One more thing. I noticed when looking at aftermarket bearings such as ACL and Clevite the whole set comes in the same sizes. With the clevites (
http://www.enjukuracing.com/cl....html ), it states they are all standard size. Is this okay or does each pair need to be special ordered to the right size?
Modified by Stripes at 12:49 PM 10/16/2009