Post by
Nis-240sx-san »
https://forums.nicoclub.com/nis-240sx-san-u61365.html
Mon Feb 23, 2009 5:06 pm
Est Time: 1min-12 hoursSkill Required: 5/5 stars
Are you confused on how to get into your 240sx? Do you need some help? this thread is for you!
There are a few steps you should do before entering your 240sx.Step 1: Make sure you are wearing some type of clothing before exiting your house.
Step 2: You must first locate your 240sx.To locate your 240sx, simply look for your car. I found mine!
Step 3: You must locate your key specifically designed for YOUR 240sx.
Step 4: Use this key to open the door lock of your 240sx. To do this, simply insert the ket into the door lock and twist!
Step 5: You may now remove the key from the lock, and open the door handle with which ever hand (or body part) you choose.
Step 6:You can now sit inside your 240sx.
Step 7: If you would like to start the engine of your 240sx, please continue to step 8
Step 8: To start the engine of your 240sx, you must insert the key specifically designed for YOUR 240sx, into the ignition.Key:Key in Ignition:
Step 9: You now must turn the key foreword until the engine starts. Note!: some 240sx's will start without having to push in the clutch pedal (if you have one). To push the clutch pedal, simply use your left foot, and step on the clutch pedal, while stepping on the brake pedal with your right foot. This may seem complicated, but dont worry, a few practice trys, and you'll eventually figure it out. Here is a picture for reference.
Step 10: To shut off your 240sx, simply turn the key backwards, and the engine should shut off. If you engine does not shut off, you might have the following problems.1. your ignition is bad2. you did not turn the key yet3. you may have a turbo timer, in which keeps the car running after the key is removed4. the nissan gods love the sound of what ever engine your are running.
Step 11: take some funny pictures in your 240sx
THIS IS A SERIOUS DIY!!! DO NOT DELETE!