distributor help

[chickencombo]

I have a 1995 240sx. I've been trying to get the distributor off to no avail. I've taken out about all the screws and it still wont come off. Can someone please tell me if there is something else I dont know.

[PSI240SX]

there are orings on the shaft of the distributor that are probably making it difficult to come out of the hole.... just keep trying, it will come out.

[navysnail]

you could spray a little pb blaster on it

[revhard05]

hammer...rotate it and tap out the brckets

[yellow_jacket]

I believe the distributor is held in by two bolts. It sounds like you took the screws out of the distributor cap. But if you did take out the correct 2 bolts(probably 12mm) then do like they said and rotate the distributor as you are pulling.