distributor for ka24e carb swap

[rippinka24_671]

i have a question what distributor could be used for a ka24e i swapped of the stock mpi system from a hardbody to sidedraft any suggestions??

[S13DrIfTmEkAnIcS]

to my knowlage only one dist. fits the ka24e, the s13 and s14de's are interchangeable with different wiring harnesses but i think the one u have is the only 1 u can use

[matt4pl]

you mean the Nissan Motorpsort sidedrafts? I was wondering about this myself, and i was thinking it would either use a standalone ignition or a mechanical/vacuum advance distributor

[dc2lsvtec]

from what i read, you use a L-series guts in a KA distributor.

dont quote me though. double check that....

[rotorimp]

Since your just replacing the fuel side of things I would leave the ignition side alone. You will still be using the ecu. -------you could use a Petronix system and adapt it to the dis.-Take the guts out. why are you going this route?

[rippinka24_671]

ok i have heard the same info as well, and i would have to do a little bit of modifications! thanx for the info bro

[rippinka24_671]

I have another question about the rocker arm assembly how do i go about switching from the original self adjusting to the manual adjusting rocker arms, is there another assembly that i could use off another vehicle?? is there any other objective to it??