Discuss wheels for my s14!

[GrilledCheese33]

Ok, so this summer, its wheel time for my s14 so i need a few opinions. First off will 350z, maxima, and altima wheels fit my car? those are my first choices. Newer maxima and altima wheels of course. And i'm also looking into some aftermarket things, so i put a pic of my car first, then the aftermarket ones i'm looking at so far. So, give me some input, it would be appreciated!

-Darren

Modified by GrilledCheese33 at 6:07 PM 5/28/2005
Modified by GrilledCheese33 at 6:08 PM 5/28/2005

[GrilledCheese33]

Kazera KZ-A

[GrilledCheese33]

Kazera KZ-V

[GrilledCheese33]

350z wheels

[GrilledCheese33]

maxima wheels #1

[GrilledCheese33]

Maxima Wheel #2

[GrilledCheese33]

altima wheels, also any other suggestions and pics would be appreciated, so give me some feedback!

[CaoBoY]

fno1rc's, work meisters, some good ole meshies...axis 5's (they look ilke the kazera's and you could a bigger dish! MMmmm)

[GrilledCheese33]

Bigger Dish, hmmmmmmmmmmmmm yummy, i'll look into those.

[AJ1356]

if you are looking to spendless money fn01rc are very good wheels , look nice aren't too heavey and comein 10 oe 11 inches wide, i am not sure about the 11 inches though. if you are welling to spend more money check out work , gram lights , ame, some you can order with custom offset and get some mad deep dish. for my s14 i am getting some ame circlar r's
Modified by AJ1356 at 5:35 PM 5/29/2005

[574-240sx]

I almost bought a set of G35 rims off of ebay and decided not too and save for a new set

[Juujai]

if the kazera comes in low offsets like 25~ or lower i'd choose those over all of these.

you are 5lug take advantage of lower offset wheels! 3-4inch lip =) if youdont wanna spend a lot check out the uras wheel.

[GrilledCheese33]

i'll reply when i get back from detailing my car this afternoon.

[SmithSR]

There are some good picture threads going on right now in the Wheel/Tire forum with pictures of 350Z wheels installed. All the oem wheels you pictured will fit but the altima and max wheels are flush faced with +40 offset and will look more sunken in than a 350z wheel for example.Search the Wheel/Tire forum!

[GrilledCheese33]

ok, i'm back. Washed, waxed, and cleaned the inside of my car. So here is what i decided. I'm either going with the kz-a blck rims or oem 350z wheels! I will make a new thread once i can find a decent set. Thanks for all the input!

[cyrus240sx]

you should look at the 350z track ed. wheels that smithsr test fitted on his s13http://forums.nicoclub.com/zerothread?id=117979

[WhiteKoukiS14]

ok, i'm back. Washed, waxed, and cleaned the inside of my car. So here is what i decided. I'm either going with the kz-a blck rims or oem 350z wheels! I will make a new thread once i can find a decent set. Thanks for all the input!

I have a set of 18" performance\touring 350z wheels for sale with tires if you interested they only have 5000 miles on the rims and tires, I sold my Z and put them on the 240...they clear the 300zx brake upgrade with room to spare....im in Vero Beach, Florida as well, they are perfect condition email me if you are interested [email protected]

http://www.mustangmods.com/data/8070/10 ... 5_0561.jpg