ding / dent removal
ding / dent removal
Does any one have a do it yourself way of removing dings caused by a shopping cart
-
allensteiner
- Posts: 1193
- Joined: Mon Oct 22, 2007 2:55 pm
- Car: 1995 Nissan Maxima GLE, 2005 Pontiac Bonneville SE
Re: ding / dent removal (Tomsoxfan)
yeah...buy a dent puller
-
MinisterofDOOM
- Moderator
- Posts: 30928
- Joined: Wed May 19, 2004 5:51 pm
- Car: 1962 Corvair Monza
1961 Corvair Lakewood
1974 Unimog 404
1997 Pathfinder XE
2005 Lincoln LS8
Former:
1995 Q45t
1993 Maxima GXE
1995 Ranger XL 2.3
1984 Coupe DeVille - Location: The middle of nowhere.
Re: ding / dent removal (Tomsoxfan)
Depends where the dent is. You might be able to tap it back out if you can get a hammer behind the sheet metal. You'll want a dolly of some kind to keep it from simply becoming a convex dent instead of a concave one.
Re: ding / dent removal (MinisterofDOOM)
A MAJOR NO NO to hammer on a dent without a dolly. You can purchase a hammer and dolly at Kragen or Pepboys...or even at home depot i believe, lol.
if you don't want to tackle it yourself(because it's NOT easy using a hammer and dolly if you are not experienced, trust me i took an autobody class for 2.5 years), find a local shop that does "paintless dent removal"!!
good luck man!!!