dimensions for Z32 front rotor

[cdlong]

i have a little pet project i'm working on where i need the dimensions of a stock rotor. if anyone knows where to find the specs or can take really precise measurements that would be great. i want to make an autocad drawing of the entire rotor so i need everything, not just diameter and thickness.

if i could get both the 30mm and 26mm parts, i would be especially greatful.

[DriftinNC]

you can check out this site only iff you have adobe readerhttp://www.dba.com.au/catalogu...e.pdf

[Rex]

I think TT and NA are different, but I'm finding 11.5" diameter and 30mm thickness.

[cdlong]

for some reason that website isn't working for me, maybe cause i'm at work. i'll check it again when i get home.

btw the rotors are 11", not 11.5" (or 280mm to be precise). i need dimensions like the offset from the inside of the hat to the back side, the ID of the braking surface, among other things.

[cdlong]

that gets me a good part of the way, but there's other stuff that's important. the thickness of the mounting face would be good and the inner diameter of the braking surface.

is the first skyline the same as the '90 NA Z32?

[Nismo_Freak]

for some reason that website isn't working for me, maybe cause i'm at work. i'll check it again when i get home.

btw the rotors are 11", not 11.5" (or 280mm to be precise). i need dimensions like the offset from the inside of the hat to the back side, the ID of the braking surface, among other things.

1. Buy new rotor2. Buy digital caliper3. Go NUTZ!!!11one.

[hannibal]

Came across this site the other day. It listed the 'height' of the rotor (laying flat on the ground).30mm disc are 53.7mm tall/deep...http://www.nolimitmotorsport.com/prod/BR25417

[cdlong]

i tried that first, but i live in BFE and i have to order anything. no one carries them. that's why i was hoping someone that lived near something resembling civilization could help me out.

that same dimension is on the site listed earlier. there's more i need though.