Digital Speedo not working HELP!

[Omega47]

My car is an 89 240sx SE but has an SR20DET in it,i swapped the tach out so that works,the engine and saftey lights,temp and fuel gauges,work as well.Problems:Speedo doesnt turn on...Cluster does not illuminate...Turn Signals do not show on cluster...

Im so frustrated atm...

Any Help is greatly appreciated.
Modified by Omega47 at 7:33 PM 3/28/2006

[xs04298]

Turn light signals arent lighting up either? well first place i'd start would be the connection behind the cluster itself because i believe both of those are on the same plug

[Omega47]

Its connected correctly

[xs04298]

I really don't know much about SR swaps, but do all the transmission wires connect straight up?..sounds to me like there is a wiring glitch somewhere, but its strange that its both the speedo and the turnsignals since they are so ..differnt...i'd almost think its the cluster but, thats pretty rare... hope someone else has some better awnsers for ya..

[Omega47]

The cluster is working BUT Stereo is not working,the seatbelt dont retract unless the key is to the on position,the door open light is pulsing when doors are closed,and odo./trip are not working. SOMONE HELP ME,im frustrated and pissed off,i need this **** to work.PLEASE HELP

[wangless]

Cluster lights not working usually means faulty TCU. Look around the kickpanel area, where all the fuses are. There should be a white box. That usually causes cluster lights not to work properly.

Odo/Tripmeter not working is probably a bad speed sensor.

Where in socal are you? I might be able to help you out more if I can see the car.