Did a few test runs with my Profec B,And i need some help!!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
9240sx
Posts: 2676
Joined: Wed Dec 10, 2003 4:06 am
Car: What i believe to be the cleanest s13 in the world.

SR20DET + RS*R-Apexi-Nismo-Trust-HKS= 100% pure love
Location: New Mexico

Post

I just hooked up my Profec b on my s13 motor,And i set it to 12psi and theres almost no spike,But it will be at about 11.5psi for a few seconds and the needle on the boost gauge will start to move around alittle,up and down.and i can hear it in the exhaust note.And when i turn off the boost controller its fine at 7.5psi.Any ideas why?

I have the stock intercooler and bov,I did have RC clean the injectors and i have a Walbro 255 with a new 300zx fuel filter.


User avatar
creophus
Posts: 1142
Joined: Mon Jan 27, 2003 10:26 am
Car: 240SX SE & 200SX
Contact:

Post

Doesn't sound like that big a deal to me.

Either way, free bump.


Return to “SR20DET Forum (rear-drive)”