Devious can you still get the solid lift conv.
Devious can you still get the solid lift conv.
I need a set of solid lifter conversion I also need to find out who is making cams for solids thanx !
No one is doing solid KA cams yet, i will be having one done from a billet by Wade cams here in oz.I don't know whether devious had the same issues with the RWD KA rocker cover, but on my FWD KA the cover JUST fouls against the locknuts. I can't remember whether he changed the locknuts from the ones i told him i use.....
-
deviousKA
- Posts: 1355
- Joined: Tue Aug 12, 2003 5:04 pm
- Car: 90 240sx NA /72 Datsun 510 NA /86 corolla GTS NA
- Contact:
oops didnt see this post LT_Z i replied to your other. Cams can be ground with a bit more appropriate lobes for the solid lifter geometry, but the grinds for the stock hydraulic system work fine.
I have had no rocker clearance issues with mine. Time before last i adjusted my valves, i checked all clearances with clay and had over .080" clearance at tightest point. This is with stock rwd 240sx valve cover.
I have had no rocker clearance issues with mine. Time before last i adjusted my valves, i checked all clearances with clay and had over .080" clearance at tightest point. This is with stock rwd 240sx valve cover.
I must have missed it email me @ [email protected] lemme know how much and all i need to get this thing started !