Desprate Need of Carl H tune!!!!!

[trueblue6193]

Well like the title says, I have a R32 with a RB20DET that I'm upgrading my injectors, fuel rails, and fuel pump. Can't find anyone even close to me who can do a Rom tune. Any help with this would be greatly appreciated.
Specs:
Top Mount Turbo T76
38mm external waste gate
FMIC
Apexi Power FC
440cc injectors
Yellow Jackets
On 12psi

Upgrading to 750cc injectors, walbro 255, Bore fuel rail, New radiator. Want to increase boost and tune desperately

[Yellow4g63]

Your list says PFC? Carl didn't do any PFC's. And where are you located just incase someone close to you see's your post and can point you to some place that can tune your PFC?

[trueblue6193]

There was a post back from 09 said he did do one so I assumed he could. I'm in El Paso Tx, nearest tuner for in person is SC or NY supposedly

[ANVIL]

Get the datalogit and FCedit and any reputable tuner in your area shouldnt have a problem tuning it

www.fc-datalogit.co.nz

[trueblue6193]

That's just it though, there are no tuners in my area reputable only overseas lol

[Largekid]

buy the datalogit, and find a shop with a dyno. I'm sure there are some great shops in Dallas/Ft Worth, or even San Antonio/Austin area. If not, I'd find it hard to believe there isn't something awesome in Arizona as well. There are reputable tuners all across the country, even some that will do remote tuning if you can get the internet and a dyno setup. Personally, I would never trust a full tune via mail etx. Sounds like you need to look into more tuners/shops. Sound Performance in Chicago will tune PFC, so will Dynosty in Louisville...they are closer than SC or NY too...

[trueblue6193]

There's only 2 registered shops who can tune the power fc one is in SC and the other is NY I contacted both and neither will do remote tunes for it and says it needs to be in the shop.

[Largekid]

I found these 2 just by quick searching. Both have good reputations. They are out there man, you just have to look.

http://www.atsracing.net/Main/Dyno

http://www.kantuning.com/dyno-tuning-and-testing.php

[95_240]

You don't need a shop that is "registered." Call up some local dyno tuners and see if they tune PFC. Not that difficult.

[ANVIL]

The shops who are registered I beleive just have access to a data logit type of software provided by apex.

Any shop with a dyno should be able to tune with datalogit. Most software across all platforms to do tunes are very similar... at worst it will take them longer just to figure out exactly how to use the functions, ect.

[Hcr32skyline]

Also need a carl h rom tune here. Rb20det with some mods.