Dee Help with Crank 4 SDS

[LoserbabyS13]

Do you have any pics of your crank pulley and mount for the Hall sensor?? Thanks in advanced.

[boost_boy]

Here's some help:

[boost_boy]

Here's something very informative:

Dee

[LoserbabyS13]

Forgot to ask earlier how do you drive the tach with the SDS. I am assuming it has something to do with the green tech wire comming off of the coils pack.

[boost_boy]

http://www.nicoclub.com/forums...y+SDS

This is what i meant to post:

Dee

[boost_boy]

That green wire goes directly to the wire that controls your tach!

Dee

[LoserbabyS13]

Did you do the crank your self or did you have it done. I am thinking I can do this at my shop with some help from some of my mechanics here. Also is there anything special I need to know before doing the install or anything to be prepared for being that you have done several?

[boost_boy]

Pay attention to what you're looking at in the manual. THe magnets have to be put in correctly or else it won't start. I actually designed and cut other customer's hall sensor brackets, but I did not weld them together. When you get it all started, I'll tell you what to do from there.

Dee

[LoserbabyS13]

I am pretty close to being deon with the install. I am wondering dee if you can point me in a good direction for settings on it to get it running. I have 550's and running about 10-12 psi. Thanks!