Dallas Texas and surrounding areas

[Nathan]

Oh...in order for it to be slander, Sammy would also have to prove it's all untrue...if it's true, then dirtydrifter can say whatever he wants Furthermore, then if Sammy lost the suit he could stand to loose even more money paying for drifters court cost and lawyers fees I think everyone should just drop the whole thing, this isnt really the best place to have it out. I'm just happy there is another welding/install/paint guy around here!

[PROJECTRB240SX]

DIRTYDRIFTER DO YOU DO RB MOTORS?

[DirtyDrifter]

ok the guy with the white corvette is Clint who also drives a rx-7 who is also a good friend of mine so while you putting your nose in dallas business you need to consider your own problems You have a swap already so basically this tread as nothig to do with you and you still didnt answer my question You must have add since you read something then forget. but court fees for claims court is around 100 dollars and you dont need a lawyer just recipts and facts this isnt a murder what the hell I need a lawyer for. why are you so defensive for him im not sueing you what does it matter to you? I dout I can be sue fo sayig **** sammy honestly 180sxyou must be about 16 year old.

[PROJECTRB240SX]

CAN YOU GET RB PARTS? ALSO CAN YOU MAKE ROLL CAGES?

[DirtyDrifter]

i can do some upgreads on the rb series but I honestly havent installed one in 240's but Know could I can get the wireing done at this shop I know. but I have done turbo upgreades cams and a few other installs on the rb26. I canget some parts for the rb just emal me with what you need. Peace Jace

Ps I agree lets drop the sammy thing

[18DSX]

first off its $400 to file suit with the county clerk, and no you do not need a lawyer. but if you wind up in court, and he has a lawyer and you dont. you will not win. all his lawyer has to do is site a bunch of cases. you will deffinatly need someone that has knowledge of case law to counter. this would likely not be a small claims case seeing as how there is more then $5K in business at stake

[nismo240]

i have known jace all my life and he is very good at what he does....nissans are his thing and he can tell you anything you need to know about your ka or sr20 or any other nissan motor...and when it comes down to it ....he can tell you anything about any other engine also! believe me when i say this...Cartune Texas is not the right place to get any kind of work done for your car... especially if you just can't wait to get the swap.....and it takes him three weeks to do it! you want someone that can do it in three days....and the man i am talking about is JACE.... to help you out if you have any doubts about where to take your car..... JACE will be there.....and the cheapest guy out there that can do it right the first time!! PEACEOUT jaces nigga....chris:ylsuper

[PROJECTRB240SX]

I AM LOOKING FOR A COMPLETE GASKET SET AND A METAL HEAD GASKET FOR THE RB20DET. OHH I AM INSTALLING IT MYSELF BUT I MAY WANT YOU TO DO SOME OTHER STUFF FOR ME. COULD YOU PLEASE CHECK ON THOSE PRODUCTS FOR ME? THANKS.

[18DSX]

so tell me where the ignitor chip is located on an RB25 and RB26?

[PROJECTRB240SX]

ME?

[18DSX]

no I want to hear if this DirtyDrifter knows his **** about RB motors? according to Sammy the only work Jace ever did to any of the skylines is help him change a steering wheel

[SCOOBYSHAG]

i can do some upgreads on the rb series but I honestly havent installed one in 240's but Know could I can get the wireing done at this shop I know. but I have done turbo upgreades cams and a few other installs on the rb26. I canget some parts for the rb just emal me with what you need. Peace Jace

Sounds like to me from this quote that RB's are not his specialty. I dont see anywhere that says he has installed ignitor chips on RB motors, so why would you expect him to know that question? It is probably a trick question anyway.

Why are you giving him the third degree?

He is offering people help for cheaper than ALL of the other guys (CTC, Cartune, Entuning, etc.) and you are just trying to denounce him. You know a LOT of people start their own businesses because they are unhappy with goods or services they receive in whatever area it may be.

[18DSX]

if he has changed cams in an RB26, and dose not know where the ignitor chip is, then there is a problem. bcause you have to dissconnect the ignitor chip inorder to remove the valve cover. and you have to remove the valve cover inorder to remove the cams

[PROJECTRB240SX]

WHY IS IT CALLED AN IGNITOR CHIP BY SOME AND AN IGNITION AMPLIFIER BY OTHERS, I NEVER UNDERSTOOD THAT? OHH WELL I FEEL YOU SHOULD LET HIM BE AND IF PEOPLE DECIDE TO USE HIM, LIKE I MAY, FIND OUT WHAT HIS SERVICES ARE LIKE. THE UNITED STATES ALLOWS FREE ADVERTISING SO LET HIM ADVERTISE ALTHOUGH I DON'T AGREE WITH THE WAY THAT HE HAS GONE ABOUT DOING IT THROUGH THE SPAN OF THIS THREAD.

[18DSX]

if he wants to talk trash about another shop, make comments that they do not know what they are doing. then why cant I?

[DirtyDrifter]

well the igniter is on top of the valve cover in the very back. I did only change a steering wheel on the skyline in dallas but there are actually 20 ppl in texas that have skylines and the one I worked on was from houston. Give me a day and I can prolly get you those gaskets. I tried to advertise through here but then ppl attack me and what not and I defend my self just like anyone else would. Jace

[18DSX]

sure ust some guy in houstonhere is a simple RB26 question, what degree is the timing set (Stock)

[SCOOBYSHAG]

if I was Jace I wouldnt be answering crap..he has nothing to prove..

I wonder if Sammy knows the timing on an RB26? doubt it, he doesnt know $hit

[PROJECTRB240SX]

THANX JACE.

[18DSX]

I am sure he knows the timing, you have to reset it when you change the cam

[Nathan]

Why does this matter so much to you? Has Jace done anything that has adversely affected you? If not...DROP IT.

[18DSX]

if he can talk about how bad sammy is why cant I critisize him

[Nathan]

Because the issue has been dropped...you keep bringing it up when even Jace agreed it should just be dropped...stop beating a dead horse, we all know how you feel now.

[18DSX]

whats wrong? Jace and his friends like to talk big but when someone has a legit car question, they cant back it up.

all of a suden when he is put to the test, he wants to quit the thread, just proves he was lying about all the cars he has worked on

[PROJECTRB240SX]

WTF IS YOUR PROBLEM, IS HE BASHING YOU? LOOK HE HAS HAD A BAD EXPERIENCE WITH CTT AND HE DOESN'T WANT ANYONE ELSE TO GO THROUGH IT SO HE IS TRYING TO PROVIDE A CHEAPER ALTERNATIVE WITH BETTER SERVICE. HE CAME HERE TO ADVERTISE AND YOU BLEW IT OUT OF PURPORTION AND DRAGGED IT ON IN A NEGATIVE WAY. HE ALREADY AGREED TO DROP THIS SAMMY THING, SO WHY DON'T YOU GET OFF HIS BACK? HE MAY NOT KNOW TIMING BUT I AM SURE HE HAS ACCESS TO BOOKS AND PERFORMANCE TUNING GUIDES FOR IT. JUST LET IT GO CAUSE HE HAS.

ANYWAY JACE IF YOU FIND WHAT I NEED EMAIL ME AT [email protected] IF YOU CAN GET A GOOD PRICE I MAY BE DOING ALOT OF BUSINESS WITH YOU. THANKS FOR LOOKING.

[18DSX]

he didnt come here to advertise, he came here to bash Sammys shop, which he already admitted to. so if he feels he can bash Sammy then why cant I bash him?

[PROJECTRB240SX]

ARE YOU SAMMY? DO YOU KNOW HIM? IF ANYONE OF THESE APPLY TO YOU THEN FINE IF NOT YOUR OUT OF LINE.

[SCOOBYSHAG]

he didnt come here to advertise, he came here to bash Sammys shop, which he already admitted to. so if he feels he can bash Sammy then why cant I bash him?

the difference is that you have NO reason to bash him. He on the other hand has reason to bash Cartune because of their shady operation. You know, Jace isnt the first person to bring up problems with Cartune. A lot of people have had problems with Cartune both in California and in Texas. A lot of people here have had problems with Sammy when he was with Boost Factor. So Sammy's track record isnt all that great. Given this, the information that Jace has provided us regarding his relationship with Cartune is definitely believable.

However, I havent heard anyone complain about Jace's services yet. Only two compliments. When Jace does something unjust or ethically wrong then you can bash him..until then he is innocent until proven guilty. Unfortunately for Sammy he has been proven guilty many times.

[SCOOBYSHAG]

Anyway, I believe the ignition timing for an RB26DETT is 20 deg BTDC/950 rpm

sound about right?

[VenomousVette]

why is it I get emails and phone calls at the shop from people telling me I need to check out this thread? it seems my name has been mentioned, its Clint if you dont know me.I work at Cartune Texas, also an investor.this thread dose not bother me, so dont bother me with this thread. right now we are averaging one 240sx motor swap a week. not to mention custom engine building jobs with SR and RB motors.We have also developed good relationships with other shops in the DFW area, including CTC, Gotham Racing, and Carboys. all of whom we have been abble to help out with special projects. So far all the customers I have delt with have been satisfied, and I have not recieved any complaints.for anyone that is interested in getting a swap, our 240sx swaps start at $2800 installed. that includes motor, trany, ECU, harnes, turbo, and all labor. if you have any questions call me at the shop 972-373-9939