Custom Intakes

[koz1368]

I want to build a custom Cold air intake for my 2001 maxima. for anyone that has build one, where did you connect the crankcase breather hose?

[brianw]

Drill and weld in a port for it behind the MAF.

[koz1368]

i have three hoses, a large, medium, and small. the small is a vacum, and the large one is the breather hose, what is the meduim hose? should i drill and weld ports for all three hoses?

[Beancooker]

Yes, it is best to re-attach all the hoses.

[koz1368]

one last question before i set out on my mission. should i drill and mount the hoses on my new intake tube (closer to my filter) or right outside my throttle body (closer to my throttle body, before the MAF sensor)

[brianw]

IIRC all of the hoses connector after the MAF but before the TB on the stock airbox setup.

You should replicate this.

[Beancooker]

IIRC all of the hoses connector after the MAF but before the TB on the stock airbox setup.

You should replicate this.

I agree.