Creating a new GT-R tail overlay...MCHEDDADI... I Need your help!!!!!

[rjdmmfl1]

Speaking of the devil Hope you're feeling better boss!

Let us know when/if you start shipping any of these designs out.I'm ready to order whenever you are ready to ship

I don't know if Bat's gonna do multiple designs or just one! THat's why he wanted me to start this sthread to see

a. what design looks best on the A/Cb. what it is most people really want

Bat can chime in on whether or not he's gonna do multiple ones or just one design!

[maxentropy]

I don't know if Bat's gonna do multiple designs or just one! THat's why he wanted me to start this sthread to see

Start up a vote thread then son!

[Cali 2 Balti G]

Still seems like it would be useful to have a rear shot of the tail-lights, brake lights etc. actually lit up. This way you have the stock light signature to work off of.

[nogears909]

took

here ya go mehdi. do you magic bro

a couple mins and came up with sumthin quick to give an idea

[rjdmmfl1]

Still seems like it would be useful to have a rear shot of the tail-lights, brake lights etc. actually lit up. This way you have the stock light signature to work off of.

I'm not quite sure what you mean Cali...

We know where the turn, brake, and reverse lights are when lit up.. when Batmobile does these designs, he actually takes a template of your vehicle taillight with the lights lit up using some type of clear masking tape. He then traces out the areas and takes it back to his lab for the finishing perfecting touches...

again, right now, we just want to see hwta folks think about the different design options.

[AzureCoupe0888]

is there a thread to vote for em yet? Someone start one if not I am anxious to vote and see the winner

[Blue Batmobile]

thanks guys for your input. Personally, I dont think the faux led cuts will look good. Roberet, I'll have your kit ready later this week. Make an appointment with Ryan for Sat if posible so we can get this going !

Bat

[rjdmmfl1]

thanks guys for your input. Personally, I dont think the faux led cuts will look good. Roberet, I'll have your kit ready later this week. Make an appointment with Ryan for Sat if posible so we can get this going !

Bat

Well folks, there you have it, no need to vote, what Bat says goes!!!!!

[maxentropy]

Well folks, there you have it, no need to vote, what Bat says goes!!!!!

Pictures needed as soon as you get the install as well as availability and pricing!

[Sarcanglk]

maxentropy,

Do you know any place that will attempt to do this job in mind? I remember that you lived near me and was hoping I can use your place.

[maxentropy]

I haven't talked to my tint guy yet, but he's insanely good-- and well priced!

Really nice guy, once Bat makes these available I'mma give him a call and see if he can do 'em for me.

He lives and works out of his house in Spring City, PA.

[Sarcanglk]

Sounds like a plan... Can you let me know if he thinks he can do it. I don't really want to go back to my tint guy because i really didn't like the way he covered up the bubbles in the back with the vinyl... It looks poorly done.

[rjdmmfl1]

OK people, I got the final word from Andy, I'm getting the overlay installed on Saturday, I'll have pictures posted by Saturday evening...

some folks aren't gonna be happy with the final design, some folks are gonna love it... we'll see on Saturday...

[Sarcanglk]

niceee finally!!! Can't wait to get mine

[maxentropy]

Whoohoo!! Can't wait here too!

Sarc-- will do. Gonna give him a call once I figure out which overlays I want to purchase. Perhaps we can have him do it the same day and go for a drive after-- these shouldnt take too long to put on as compared to regular tint.

[LongBeachCoupe]

this guy over here... come on boss... leak the design!

[rjdmmfl1]

this guy over here... come on boss... leak the design!

No, real talk, I don't know what he decided! We will all see on Saturday when I get it installed!

[Ninja Mouse]

that would look unbelievable on the precision grey ones

[rjdmmfl1]

that would look unbelievable on the precision grey ones

I think this is the design he decided on, but we will see on Saturday. It may be either this, or the three stripes for the turn signal instead of four

[seekinsp]

I think this is the design he decided on, but we will see on Saturday. It may be either this, or the three stripes for the turn signal instead of four

Stripes are too close together. From a distance it would like like a single block.

[rjdmmfl1]

I agree

Stripes are too close together. From a distance it would like like a single block.

, but Bat's a pro, I just gave him design ideas (I say I meaning mchedaddi the photoshop God), Bat will do the final laser cutting with his machine, and we'll see what the finished product is gonna look like!

[rjdmmfl1]

ok, its done, but Bat asked me to wait to put up the pictures... I love the look personally... more to come soon!

[mcheddadi]

ok, its done, but Bat asked me to wait to put up the pictures... I love the look personally... more to come soon!

WHAT?! how could you do that to us, POST THEM QUICK!!!

[Blue Batmobile]

You guys are gonna Love it, I think . Pics up on a new thread tomorrow or Monday at the latest .

Bat

[vballer22]

cant... wait... much... longer...

[marcelo929]

cant wait!

[rjdmmfl1]

damn nogears909, you quick.



matter and darker:



I like with no turns:

it looks very similar to this, with three stripes... i took off the center black circle..

[vballer22]

getting... sicker.... Must... see... overlays...

[maxentropy]

It's Monday-- where are our photos!?

[rjdmmfl1]

Bat is gonna start a new thread sometime today I believe... he asked that I hold up on posting the pics, he's gonna do it! Sorry fellas...