crank andle sensor location HELP please

Post by **Glorywagon** » Sat Mar 10, 2007 3:13 pm

Modified by Glorywagon at 10:46 PM 3/10/2007

Post by **BBISHOPPCM** » Sat Mar 10, 2007 3:45 pm

The crank angle sensor on all Nissan products of that era is the optical slotted wheel sensor mounted within the distributor. You'll have to replace the entire distributor with a remanufactured unit.

Post by **Glorywagon** » Sat Mar 10, 2007 8:04 pm

Modified by Glorywagon at 10:46 PM 3/10/2007

Post by **BBISHOPPCM** » Wed Mar 14, 2007 2:03 pm

Actually, after looking at my Haynes manual, it seems you can replace the crank angle sensor without removing the distributor.

Post by **evildky** » Wed Mar 14, 2007 5:23 pm

and the Z32 as well as many other models don't have distributors, they have CAS mounted to the timing belt cover

Post by **evildky** » Wed Mar 14, 2007 5:24 pm

Glorywagon wrote:
Modified by Glorywagon at 10:46 PM 3/10/2007

dude why do you keep deleting all your own posts? are you afraid tahts how they get you ?

Post by **AZ-ZBum** » Thu Mar 15, 2007 4:23 am

BBISHOPPCM wrote:Actually, after looking at my Haynes manual, it seems you can replace the crank angle sensor without removing the distributor.

True. But you'll have to get it used. I don't believe there is a seperate part number for the CAS outside of the distributor.

Post by **Glorywagon** » Sun Mar 18, 2007 6:07 pm

DUDE It seemed like I pissed some of you off so I just done away with them.everytime a post a message you tell me to go to the manual so why ask.I'm disabled and work on my z car two or three hours a day.I don't have a good manual like you do and can't afford one (disabilty) besides I enjoy everyone on the forum.So I desided I wasn't gonna let one person drive me off the forum.And if I miss spell or hit a wrong key I'm sorry but I have macular degeration and have a little trouble seeing my key. And that is all i'm gonna say about this subject.
Modified by Glorywagon at 9:20 PM 3/18/2007

Post by **evildky** » Sun Mar 18, 2007 6:32 pm

you should really relax, don't take any of us too seriously were all a bunch of dorks, I mistype, mispell and have a total disregard for grammer and structure

also if you search the net you might find the factory service manual on pdf, I think some of them are floating around on nico but not sure about the z31

Post by **AZhitman** » Mon Mar 19, 2007 7:06 am

Do we have a FSM for the man's car that we can link him to?

Paulie, maybe a little help?

Post by **BBISHOPPCM** » Mon Mar 19, 2007 11:58 am

Glorywagen; I didn't mean any harm, honest! You will need a manual to replace the distributor (I wouldn't replace the crank angle sensor with a used one, that's just asking for trouble, unless you know the car it came from). When I buy the factory service manual, I'm willing to give you my Haynes manual for shipping costs (media mail is dirt cheap). Lemme know. [email protected]

Post by **sharjt** » Tue Mar 20, 2007 10:22 am

Here's a Link to a bunch of Factory service manuals. They have an 84 & 86 on there, I believe either will work for you. Evildy or AZ-bum, tell me if I'm wrong. They rotate their availability on the hour so if you can't down load one of them when you check try again in an hour.

By the way FSMs rock and free FSMs are even better.

http://carfiche.com/manuals021/cars/

Post by **evildky** » Tue Mar 20, 2007 4:41 pm

I dunno a bud told me about this one, he said he dl'd the z31 pdf no problemhttp://www.phatg20.net/modules...id=67

crank andle sensor location HELP please

Re: (Glorywagon)

Re: (BBISHOPPCM)

Re: (evildky)

Re: (BBISHOPPCM)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums