CPC plenum - complete custom 8 port ca18 unit

Post by **ISL33P** » Sat Sep 06, 2008 1:54 am

Just thought you guys and girls might like to see it.

I just finished this last week for a customers fwd car with the only difference being the thermostat housing being on the same end as the throttle body if it were rwd.

As you can tell everything is made from scratch...and by hand. Its suited to this particular customers engine setup (eg cams, torque, power etc etc) also with fuel rail to suit 14mm oring injectors, 80mm billet throttle body and a nice polish.

Enjoy,Ariel

Post by **boost_boy** » Sat Sep 06, 2008 4:18 am

It looks nice, Ariel. Custom runners replacing the butterfly valve housing? Nice. Sounds like a pretty mean build and a nice intake manifold to boot. Excellent job, man. Minus the T-body, what did this piece cost him? Just curious..........

Dee

Post by **rico05** » Sat Sep 06, 2008 4:28 am

Got any internal shots of the trumpets?

Post by **ISL33P** » Sat Sep 06, 2008 12:34 pm

Thanks Dee - yes its a complete replacement. say goodbye to those power robbing butterflies Looking at around $AU1300-1500 without the throttle body. All depending on whether or not its polished and with or without a fuel rail

Here is an internal shot. Not the best shot but you get the idea. All the bellmouths are blended into each other an absolutely massive job, having said that, the complete intake manifold/plenum was.

Post by **rico05** » Sat Sep 06, 2008 1:04 pm

WOW. Thanks for the skipped heartbeat.

Post by **ca18detgabby** » Sat Sep 06, 2008 3:36 pm

dam that is hot

Post by **boost_boy** » Sat Sep 06, 2008 11:13 pm

ISL33P wrote:Thanks Dee - yes its a complete replacement. say goodbye to those power robbing butterflies Looking at around $AU1300-1500 without the throttle body. All depending on whether or not its polished and with or without a fuel rail

Here is an internal shot. Not the best shot but you get the idea. All the bellmouths are blended into each other an absolutely massive job, having said that, the complete intake manifold/plenum was.

I take it this is going into an EXA?

Dee

Post by **ISL33P** » Sun Sep 07, 2008 12:55 am

sure is

Post by **r34 gtr** » Sun Sep 07, 2008 8:32 am

p0rn. 100% p0rn.

Post by **AFSil80** » Sun Sep 07, 2008 8:33 am

Looks good!

Post by **float_6969** » Sun Sep 07, 2008 9:21 am

Damnit, you need to warn us about posts like this. I just made a mess on my keyboard...

Post by **boost_boy** » Sun Sep 07, 2008 12:26 pm

float_6969 wrote:Damnit, you need to warn us about posts like this. I just made a mess on my keyboard...

Why must everytime you guys see something nice, you put your hands in your pants and start whackin' your wangs and spewing jism all over the damn place? You all are sick puppies (With love from Dee, of course). I feel sorry for your wives or boyfriends .

Dee

Post by **ca18detgabby** » Sun Sep 07, 2008 4:52 pm

boost_boy wrote: Why must everytime you guys see something nice, you put your hands in your pants and start whackin' your wangs and spewing jism all over the damn place? You all are sick puppies (With love from Dee, of course). I feel sorry for your wives or boyfriends .

Dee

I can pretty much be 100% that I didnt

Post by **mazikowski** » Sun Sep 07, 2008 6:53 pm

ca18detgabby wrote:
I can pretty much be 100% that I didnt

you did too, stop lying! you just have a slightly different configuration of parts

Post by **r34 gtr** » Mon Sep 08, 2008 5:26 am

I am curious why you didn't center the injectors or use 8 of them...

Post by **ISL33P** » Mon Sep 08, 2008 10:36 am

next time ill put a warning

i recommended it to him, but he only wanted 4 injectors this is the same way the standard 8 port is configured.

Post by **davidricardo86** » Tue Sep 09, 2008 6:42 pm

awesome work!

Post by **karism** » Tue Sep 09, 2008 8:21 pm

Fap,fap,fap!!!!

Hmmmm,now that is a work of art!

Post by **ISL33P** » Mon Oct 27, 2008 7:18 pm

with current exchange rates, australian dollar down approx 30%, you would be looking at $US480 + delivery for the standard runner version and from $US840 + delivery for the complete custom unit

Post by **Rin5** » Tue Oct 28, 2008 1:05 am

boost_boy wrote: Why must everytime you guys see something nice, you put your hands in your pants and start whackin' your wangs and spewing jism all over the damn place? You all are sick puppies (With love from Dee, of course). I feel sorry for your wives or boyfriends .

Dee

oh god! im not sure if i should grab my crotch or clutch my wallet!!

100% p0rn is right but i think my credit cards just crapped themselves...

do you take testes? id sell a nut and a half for 1!!

Post by **ISL33P** » Wed Oct 29, 2008 12:32 am

depends how much one of your testes are worth. are you related to johnny holmes or dirk digler ?? lol

Post by **float_6969** » Wed Oct 29, 2008 3:00 am

LMAO!

Post by **bentvalves** » Wed Oct 29, 2008 6:25 am

standard runner version VS. complete custom unit pics please??

do you have any pictures of a ca18 plenum with a q45tb attached also?
Modified by ks13 at 10:57 AM 10/29/2008

Post by **ISL33P** » Wed Oct 29, 2008 11:12 pm

here is the link for the standard runner plenum

zerothread?id=86596

sorry no pics with a q45 mounted, only the adaptor welded on but that doesn't really show anything that isnt in the thread.

Ariel

CPC plenum - complete custom 8 port ca18 unit

CPC plenum - complete custom 8 port ca18 unit

Re: CPC plenum - complete custom 8 port ca18 unit (ISL33P)

Re: (rico05)

Re: (rico05)

Re: (ISL33P)

Re: (r34 gtr)

Re: (float_6969)

Re: (boost_boy)

Re: (ca18detgabby)

Re: (r34 gtr)

Re: (ISL33P)

Re: (boost_boy)

Re: (float_6969)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums