couple questions...kouki-gymkhana

[wickedpelf]

actually these are questions for kouki-gymkhana, but any one can put in their 2 cents...i got a couple question, one what did u use to glue the lenses back on after u took them off for the LED install? any problems with water getting in? what size LED bars/blocks did u use, and did u do the amber part of the tail lights with LEDs also, if so did you use a LED block or strip?...anyone with any answers PLEASE HELP im at a loss, i dont want to spend all the time on these and have them fall apart ya know, or have them look like poop

[kouki-gymkhana]

Alright, I don't usually answer questions about the lights but here goes...

1) I didn't use any glue to seal them back up. All I did was soften up the existing adhesive in the oven and then pop the lenses back on and smoosh them down. Don't forget to screw them in from the rear as well. Be careful or you'll break them!

2) No, no water leaks as of yet and the car has been through the worst downpours S. FL can dish out.

3) The tail/stop units are 3x5 and the signals are 6x2. Yes, the signals are LED and they own! Still have to fix the hyper-flashing issue but the car is still at the shop getting the RB25 wired up so I haven't had access. BTW, I used one 6x2 array for my signals and in retrospect I wish I'd used 2 per side so consider that.

[wickedpelf]

THANK YOU!!! all i can say is thank you, i really appriciate you answering my questions! once i get all the parts up and running ill take some pics of the procedure, from what it sounds this is going to be very time consuming... but it from your pics it looks like it will be totally worth it!