could i put a sentra spec v exhaust system on my 1.8s

[gmasta]

now i need to know is that would i be able to put a any exhaust system that would go on a SE-R ..Spec V onto my 06 sentra 1.8s?

zer...id=53#" TARGET="_blank">zer...couch
Modified by gmasta at 5:13 PM 5/13/2007

[NSR_s30]

What kind of exhaust system? I know a lot of the kits for the earlier b15 sentras could work, seeing as the piping was routed the same.

[nametakennow]

Unless Nissan changed all of the hangers on 02+ it will need a little modification to fit. I know the SE-R unit doesn't line up on 00-01s.

[VMPhil]

same goes with the SE-R 03-06. hangers are different than the 1.8s

[NSR_s30]

Could always go the custom exhaust shop route..Thats what I did. 2.25 catback with a dual tip OBX muffler.

[nametakennow]

Our boy Greg (AZHitman) has a Sentra setup in whatever dimensions you want. I recommend 2.25in piping and a 13in or 22in resonator (straight-through, reduces noise without killing hp).

BRMusa.com

A custom setup with again a good muffler and res should be good too.

[gmasta]

but how much would a custom setup go for? like ball park price
Modified by gmasta at 6:19 PM 5/15/2007

[nametakennow]

Alumized will run you ~$300, stainless steel closer to $500. Give or take $50 in both cases. Without a resonator it'd be a good bit cheaper, but annoying as heck to drive around with.

[NSR_s30]

but how much would a custom setup go for? like ball park price

Modified by gmasta at 6:19 PM 5/15/2007

I payed 160 for mine. It's 2.25" catback aluminized, mandrelbent.

[nametakennow]

Damn, nice price. Resonator too or you just putting up with the noise?

[NSR_s30]

Really imo I don't think it's that loud. It's deep and once you get in the higher rpms all you hear is the intake anyways.

http://vids.myspace.com/index....69724

I'll have to get a video of just the exhaust though.

[nametakennow]

The stock header on the QG probably has a bit more restriction than my SR or a QR, so maybe that accounts for it. A little too much burbling for my taste, but the best sound I've heard at that sort of price, ever.

I have a 13in res and still set off car alarms in parking garages without much effort or a header. Once I pick up a header and cams it'll be interesting...

[NSR_s30]

When I got it done, believe me if it sounded terribly LOUD I was gonna have them put a resonator in at that time, but like I said I like it.

I have a 13in res and still set off car alarms in parking garages without much effort or a header. Once I pick up a header and cams it'll be interesting...

Header on the SR20....oh yeah it'll be a little loud.