Correct me if I'm wrong...

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
StryfeS13
Posts: 517
Joined: Sun Dec 20, 2009 1:55 pm
Car: 1993 Nissan 240SX
Location: Fresno, CA

Post

It is to my understanding that any 5-speed, base model, non abs S13 has NO harness wrapping above the passenger wheel well EXCEPT the windshield wiper motor plug, correct?

And the automatic ones have a full harness on that side, feeding the ATCU and all other automatic mumbo jumbo..right? I believe this is a harness from an automatic car..pics =

Image
Image

If it is from an auto car, will it work on my 5-speed shell?


User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

cruise control goes through that grommet as well.

Sideways570
Posts: 90
Joined: Mon Sep 20, 2010 9:27 pm

Post

i could be wrong also but i say the harness will work if all the plugs are the same and the grounds are there, but the only thing you might have to do is run a 5spd ecu. *nissan gods where are you*?

User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

you can run an auto ecu on a 5 speed setup. just not a 5 speed ecu on an auto setup


Return to “240SX Technical Forum”