Core support

Discuss the RB20, RB25 and RB26 series engines.
Post Reply
User avatar
driftersilvia240sx
Posts: 79
Joined: Mon Oct 29, 2007 6:16 pm
Car: 350z (business car)
240sx (rb25)
civic eg (winter beater)

Post

Im kind in a pickle, due to the lack of room between the engine and rad. Im faced with the means of making a custom core support. Anyone have any ideas remember the point is to increase the space between the radiator and engine so i can put e fans with shroud...

My main concern is the lower support. were the two braces come together ''nismo power brace'' i cant hack the lower support and set the radiator in there because of the 4 bolts that come threw any ideas???

Top
Yellow4g63
Posts: 3718
Joined: Mon Jan 20, 2003 6:07 pm
Car: 95 Nissan RB20 240SX RB20
91 Nissan NX2000 VE power
95 Nissan 240SX Stock
Contact:
Contact Yellow4g63

Post

S14? S13? I drilled new holes and cut the top of my core support to make room for the radiator so I could run my fan clutch with the shroud. You could get a new radiator and tuck it under the core support and you will have more room too.
Top
User avatar
driftersilvia240sx
Posts: 79
Joined: Mon Oct 29, 2007 6:16 pm
Car: 350z (business car)
240sx (rb25)
civic eg (winter beater)

Post

S13, and i just cant justify getting rid of my koyo rad.
Top
Post Reply

Return to “RB20DET / RB25DET / RB26DETT Forum”

Search for Nissan stuff on ebay!
Find Your Forum!

 

NICOclub's Nissan forums and Infiniti forums and all affiliated sites are the property of HDS Holdings, Inc.
They are independent publications and are not affiliated with or endorsed by Nissan or Infiniti.

Information Copyright © 2000-2026 by NICOclub, all rights reserved. Material may not be copied or reprinted without written permission.

Privacy Policy