Coolant/Water Lines...Need Help!!!

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
positron1
Posts: 3609
Joined: Mon Mar 21, 2005 12:29 am
Car: Project: 1993 Nissan 240SX Coupe SR
Daily: 2010 Honda Civic Coupe
Location: Starkville, MS.

Post

I've checked my FSM's and I still can't find out where the outlets coming off these coolant and water lines go to...little help?!Where do the outlets on these coolant and water lines under the intake manifold go?Where does the outlet on the bottom of this water line go......do either of them have anything to do with the two small outlets on the back of the IACV? Where do they go? I've checked the manual and looked at pic after pic of peoples engines and I still can't figure it out...any help would be greatly appreciated!


S14toRPS13
Posts: 2333
Joined: Mon Apr 03, 2006 1:11 pm
Location: Back to CA

Post

In the top picture the top nipple runs into your manifold. You'll see when you put your manifold on there's another nipple right above that nipple. The bottom nipple in that top picture I believe runs into that nipple on the IACV closest to the pliers in the picture. The third nipple runs into a the bottom left nipple on the throttle body. Someone correct me if I'm wrong, but I'm almost pretty sure.

User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

Quote »[/quote]Both go to IACV. They used molded lines originally. You'll need to test fit the intake mani and measure and cut the hoses if you destroyed them when pulling the manifold off.

Quote »[/quote]Long hose to the left coolant tube on the throttle body


User avatar
positron1
Posts: 3609
Joined: Mon Mar 21, 2005 12:29 am
Car: Project: 1993 Nissan 240SX Coupe SR
Daily: 2010 Honda Civic Coupe
Location: Starkville, MS.

Post

Cool, Nico rocks! Thanks guys that's exactly what I needed to know!

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

This might help you as well, its straight from the Redtop FSM

User avatar
positron1
Posts: 3609
Joined: Mon Mar 21, 2005 12:29 am
Car: Project: 1993 Nissan 240SX Coupe SR
Daily: 2010 Honda Civic Coupe
Location: Starkville, MS.

Post

Thanks! I'm jealous because duffman don't have to pay shippin' for his parts from West Covina Nissan!

duffman1278
Posts: 6816
Joined: Sun Apr 01, 2007 3:09 pm
Car: 89 240sx Hatch, the wildcats!

Post

haha yea its awsome to have near by

User avatar
inkslingers13
Posts: 1063
Joined: Tue Dec 04, 2007 5:32 pm
Car: 1985 Corolla Gt-S

Post

S14toRPS13 wrote:In the top picture the top nipple runs into your manifold. You'll see when you put your manifold on there's another nipple right above that nipple. The bottom nipple in that top picture I believe runs into that nipple on the IACV closest to the pliers in the picture. The third nipple runs into a the bottom left nipple on the throttle body. Someone correct me if I'm wrong, but I'm almost pretty sure.
can you say nipple!!!! this helped me alot to, doing the same thing! thanks


Return to “SR20DET Forum (rear-drive)”