Coolant temp sensor check list to figure out problem

For the RWD SR20DET cars! Sponsored by Wiring Specialties.
User avatar
corey240
Posts: 3306
Joined: Thu Sep 08, 2005 10:04 am
Car: 1993 Nissan 240SX Base Drift Machine
Location: Cumberland, MD

Post

ok i know my coolant temp sensor system is bad, which one is bad, i dont know. the gauge doesnt work and the ecu is throwing code 13. iv swapped the sensors with 2 others of each and no fix. what should i set my multimeter at to test each sensor? and which wire do i test on the ecu sensor? could i get an autometer gauge or similar unit and just use the stock sensor but run a wire straight from the sensor to the gauge so i know it wouldnt be wiring? or is there more to that? im tired of this bs and iv searched and done everything i could come up with so if what comes from this thread doesnt fix this problem im gona give up on the thing completely. car is s14 with redtop.


User avatar
corey240
Posts: 3306
Joined: Thu Sep 08, 2005 10:04 am
Car: 1993 Nissan 240SX Base Drift Machine
Location: Cumberland, MD

Post

ttt


Return to “SR20DET Forum (rear-drive)”