conversion question

[jdmwojo]

i was just wondering if a 5 lug hub from an s14 will bolt straight up to an s13 so i can convert it??

[jdmwojo]

or do i have to buy a 5 lug conversion??

[Two Fowty]

I think you have to do the conversion, but I wouldn't take my word for it. I'm still 4 lug :\

[jdmwojo]

I think you have to do the conversion, but I wouldn't take my word for it. I'm still 4 lug :\

lol im just wondering because by buddy has an s14 parts car with 5lugo and i was wondering if the front end would bolt straight on o my car also anyone know??

[jeff420]

no its impossible to make a s13 5 lug. no way. cant happen.

[OutToWinPAHC]

Please search, its been covered a ton of times.

Rear S14 5 lug or Z32 Na rear hubs.

for the front you needS14 5 LuJ hubsS14 KnucklesS14 LCA or S13 LCA with S14 LBJs pressed inYou then need a reducer for the S13 shocks / coils since the S14 knuckles use a larger strut to knuckle bolt.

Or just good old conversion hubs with OE bearing (s13 bearing that is)

[24j0hn]

Please search, its been covered a ton of times.

Rear S14 5 lug or Z32 Na rear hubs.

for the front you needS14 5 LuJ hubsS14 KnucklesS14 LCA or S13 LCA with S14 LBJs pressed inYou then need a reducer for the S13 shocks / coils since the S14 knuckles use a larger strut to knuckle bolt.

Or just good old conversion hubs with OE bearing (s13 bearing that is)

i thought it was for the rear that you needed the knuckles and lca and the reducer for the shocks in the rear

and the front is just a nut in the center and just put 5 lug...

thats just what i thought

[tEknoS13]

Apparently you where wrong. BTW: thats a HUGE SIG

[nevertheless]

RESIZE YOUR SIG ALREADY!!!

[jeff420]

RESIZE YOUR SIG ALREADY!!!

lmao ohh the irony.