Combination switch - Easy install?

Post by **Jesda** » Fri Mar 10, 2006 11:03 am

My brother's 95 G20 needs a combination switch (the turn/high beam stalk) to pass a safety inspection and get the high beams working. $48 part from Scottsdale... is it easy enough to DIY?

Post by **AZhitman** » Fri Mar 10, 2006 11:48 am

Yep. Cake.

Might hafta pull the steering wheel...

Post by **Jesda** » Sat Mar 11, 2006 12:54 am

Pulling the steering wheel...

This sounds like a job for a professional.

Post by **RED_DET** » Sun Mar 12, 2006 11:12 pm

Now steering wheel pulling needed. Just take plastic cover off that goes around the steer wheel and you will have all the access you need.

Post by **Jesda** » Sun Mar 26, 2006 3:39 pm

Awesome! Took ten minutes. Removed the six screws on the bottom and two screws holding the switch in. High beams work now! Thanks guys.

Post by **RED_DET** » Thu Mar 30, 2006 4:47 pm

Good to hear!! Better than pulling steering wheel, huh?

Combination switch - Easy install?

Combination switch - Easy install?

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums